Stäng inte av datorn eller koppla från strömkällan medan BIOS uppdateras. Annars kan datorn skadas. Under uppdateringen kommer datorn att startas om och en svart skärm kan visas en kort stund.
Läs installationsanvisningarna och den viktiga informationen nedan innan du uppdaterar.
OptiPlex 7010 System BIOS
Omstart krävs AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Dell OptiPlex 7010 System BIOS
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
1.Address deep sleep mode issue.
2.Address USB issue.
Läs mer2.Address USB issue.
Version
A12, A12
Utgivningsdatum
25 jan. 2013
Hämtningstyp
System-BIOS
Kategori
BIOS
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format Visa viktig information
Filformat: Körbar CPG BIOS-fil för Windows/DOS
Filnamn: O7010A12.exe
Filstorlek: 8.03 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet består av en körbar BIOS-fil. Det universella formatet (Windows/MS DOS) kan användas för installation från alla Windows- eller MS DOS-miljöer.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
716da97241ec13a1bd74c6c73d2cfd58
SHA1:
7bde8e889727b0c0fdca4c85ce148bebf974de71
SHA-256:
b6c5d7ad5318512a96dcfb76182935a2c1b142a619a3c728148e31ddd7dbc0e1
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
Upgrading and Downgrading between Pre-Win8 BIOS Images and Win8 Feature Enhanced BIOS Images.
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 ReleasedBIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 ReleasedBIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.
Gäller
Dell Optiplex 7010
Installationsanvisningar
Download file to Desktop
The file O7010A12.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to
get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O7010A12.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will closeall applications, shut down Windows,
Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not create the DOS system files.
1. Copy the file O7010A12.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O7010A12.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you doesn't enable BitLocker on your system you can ignore it.
The file O7010A12.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to
get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O7010A12.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will closeall applications, shut down Windows,
Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not create the DOS system files.
1. Copy the file O7010A12.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O7010A12.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you doesn't enable BitLocker on your system you can ignore it.
Behöver du hjälp med BIOS-problem?
Hitta en lösning i Dells manual för användning och felsökning av BIOS.Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner