Adaptec 39160 SCSI Controller - Firmware, v.BIOS v3.10, A03
INŠTALOVANÉ AUTOMATICKY Tento súbor bol automaticky nainštalovaný ako súčasť nedávnej aktualizácie. Ak máte nejaké problémy, môžete si ho stiahnuť a znova nainštalovať manuálne.Obsah tejto stránky mohol byť preložený automaticky. Ak máte k prekladu nejaké pripomienky, vyplňte formulár v spodnej časti stránky.
Adaptec 39160 SCSI Controller BIOS
Odporúčané
Nájdite si najvhodnejší ovládač na stiahnutie pre svoje zariadenie
Ak chcete zobraziť informácie o najnovších ovládačoch pre váš systém, zadajte požadované informácie o svojom produkte.Prezrieť lokalitu podpory
Zadajte servisný tag alebo model svojho zariadenia Dell
Chcete vyhľadať svoj produkt? Zadajte identifikačné číslo produktu. Ukážte mi, ako na to
Tento ovládač nie je kompatibilný
Tento ovládač nie je určený pre zvolený produkt. Ak chcete zobraziť všetky ovládače pre iný produkt, vyberte iný produkt, znova zadajte požadované informácie o svojom produkte alebo navštívte stránku podpory pre produkty.
Ak chcete použiť automatické skenovanie, prihláste sa do systému Windows ako správca. Ak sa vám toto hlásenie zobrazuje napriek tomu, že ste sa prihlásili ako správca, reštartujte počítač. Vaše zariadenie spravuje váš správca IT, preto môže byť dostupnosť funkcií obmedzená.
Vyhľadajte ďalšie aktualizácie. Použite SupportAssist na vyhľadanie najnovších aktualizácií ovládačov.
Opravy a vylepšenia
Includes all fixes and enhancements in Dell Special code stream and Adaptec Service Pack code
stream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
- key to toggle color/monochrome video display mode will be removed
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
Viac informáciístream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
-
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
Verzia
BIOS v3.10, A03
Dátum vydania
06 okt 2004
Typ súboru na prevzatie
Systém BIOS
Kategória
SCSI bez systému RAID
Dôležitosť
NaliehavéDell Technologies odporúča nainštalovať túto aktualizáciu počas nasledujúceho plánovaného cyklu aktualizácií. Aktualizácia obsahuje zlepšenia, ktoré umožnia udržať celý systém v dobrom stave. Systémový softvér vďaka nej zostane aktuálny a kompatibilný s inými systémovými modulmi (firmvér, BIOS, ovládače a softvér) a jej súčasťou môžu byť aj ďalšie nové funkcie.
Dostupné formáty Zobraziť dôležité informácie
Formát súboru: Jeden alebo viacero samorozbaľovacích súborov diskových obrazov vnútri samorozbaľovacieho súboru ZIP
Názov súboru: 160FW310.exe
Veľkosť súboru: 293.19 KB
Tento súbor je veľký. Ak máte pomalšie pripojenie na internet, sťahovanie môže trvať trochu dlhšie.
Popis formátu:
Tento soubor obsahuje komprimovanou (případně komprimovanou do archivu ZIP) sadu souborů. Stáhněte soubor do složky na pevném disku a poté na něj poklepejte, rozbalí se sada souborů. Podle pokynů dokončete instalaci.
Ak chcete skontrolovať neporušenosť prevzatého súboru, overte kontrolný súčet.
MD5:
Nie je k dispozícii
SHA1:
Nie je k dispozícii
SHA-256:
Nie je k dispozícii
Prevzatím súborov vyjadrujete súhlas s podmienkami Softvérovej licenčnej zmluvy so spoločnosťou Dell. (v angličtine)
Dôležité informácie
In order to create this diskette, the file must be downloaded to and executed on a system running
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
Operačné systémy
Nevzťahuje sa
Vzťahuje sa na
39160 SCSI Controller - Firmware
Pokyny na inštaláciu
Custom Instructions for 160FW310.exe:
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.
Pomocník a kurzy k ovládačom
Ďalšie súbory na prevzatie nájdete na stránke Ovládače a súbory na prevzatie Pomoc s používaním informácií na tejto stránke nájdete na stránke Pomocník a kurzy k ovládačom