Dell Microsoft Hotfix and KB Updates for NAS, v.1.1.0.0, A00
INŠTALOVANÉ AUTOMATICKY Tento súbor bol automaticky nainštalovaný ako súčasť nedávnej aktualizácie. Ak máte nejaké problémy, môžete si ho stiahnuť a znova nainštalovať manuálne.Obsah tejto stránky mohol byť preložený automaticky. Ak máte k prekladu nejaké pripomienky, vyplňte formulár v spodnej časti stránky.
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Odporúčané
Nájdite si najvhodnejší ovládač na stiahnutie pre svoje zariadenie
Ak chcete zobraziť informácie o najnovších ovládačoch pre váš systém, zadajte požadované informácie o svojom produkte.Prezrieť lokalitu podpory
Zadajte servisný tag alebo model svojho zariadenia Dell
Chcete vyhľadať svoj produkt? Zadajte identifikačné číslo produktu. Ukážte mi, ako na to
Tento ovládač nie je kompatibilný
Tento ovládač nie je určený pre zvolený produkt. Ak chcete zobraziť všetky ovládače pre iný produkt, vyberte iný produkt, znova zadajte požadované informácie o svojom produkte alebo navštívte stránku podpory pre produkty.
Ak chcete použiť automatické skenovanie, prihláste sa do systému Windows ako správca. Ak sa vám toto hlásenie zobrazuje napriek tomu, že ste sa prihlásili ako správca, reštartujte počítač. Vaše zariadenie spravuje váš správca IT, preto môže byť dostupnosť funkcií obmedzená.
Vyhľadajte ďalšie aktualizácie. Použite SupportAssist na vyhľadanie najnovších aktualizácií ovládačov.
Opravy a vylepšenia
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Viac informácií• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Verzia
1.1.0.0, A00
Dátum vydania
12 apr 2010
Typ súboru na prevzatie
Aplikácie
Kategória
Operačný systém
Dôležitosť
NaliehavéDell Technologies odporúča nainštalovať túto aktualizáciu počas nasledujúceho plánovaného cyklu aktualizácií. Aktualizácia obsahuje zlepšenia, ktoré umožnia udržať celý systém v dobrom stave. Systémový softvér vďaka nej zostane aktuálny a kompatibilný s inými systémovými modulmi (firmvér, BIOS, ovládače a softvér) a jej súčasťou môžu byť aj ďalšie nové funkcie.
Dostupné formáty
Formát súboru: Balík aktualizácií pre systém MS Windows, 32-bitový
Názov súboru: APP_WIN_R255746.EXE
Veľkosť súboru: 4.21 MB
Tento súbor je veľký. Ak máte pomalšie pripojenie na internet, sťahovanie môže trvať trochu dlhšie.
Popis formátu:
Aktualizačné balíky Dell (DUP) vo formáte pre 32-bitový systém Microsoft Windows je možné spustiť aj v 64-bitových systémoch Microsoft Windows. Aktualizačné balíky Dell (DUP) vo formáte pre 64-bitový systém Microsoft Windows je možné spustiť len v 64-bitových systémoch Microsoft Windows. Pri výbere aktualizácie ovládača zariadenia skontrolujte, či ste vybrali aktualizáciu vhodnú pre váš operačný systém.
Ak chcete skontrolovať neporušenosť prevzatého súboru, overte kontrolný súčet.
MD5:
84EDDC6DD74CAD8EFBA0EE16E185B504
SHA1:
Nie je k dispozícii
SHA-256:
Nie je k dispozícii
Prevzatím súborov vyjadrujete súhlas s podmienkami Softvérovej licenčnej zmluvy so spoločnosťou Dell. (v angličtine)
Operačné systémy
Windows Server 2008 x64
Pokyny na inštaláciu
Custom Instructions for APP_WIN_R255746.EXE:
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
Pomocník a kurzy k ovládačom
Ďalšie súbory na prevzatie nájdete na stránke Ovládače a súbory na prevzatie Pomoc s používaním informácií na tejto stránke nájdete na stránke Pomocník a kurzy k ovládačom