Ne mettez pas l’ordinateur hors tension et ne le déconnectez pas de sa source d’alimentation pendant la mise à jour du BIOS, cela risquerait d’endommager votre ordinateur. Au cours de la mise à jour, l’ordinateur redémarre et il se peut que vous voyiez brièvement un écran noir.
Avant de procéder à la mise à jour, lisez les instructions d’installation et les informations importantes indiquées ci-dessous.
Dell OptiPlex System BIOS, A09
AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
1. Update Hotkey processing.
2. Fix ACPI tables for PCMCIA type devices
Version
Date de publication :
Type de téléchargement
Catégorie
Importance
En optionEn effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)
Important Information
- The Floppy Format is recommended for most users. Floppy format creates a bootable self-extracting disk.
- The Non-packaged Format is intended for advanced users that only require the bootable disk.
Installation Instructions
Floppy Format
Creating the disk:
This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.
- Click Download now from the Download and install section, to begin.
The File Download window appears. - Click Save this program to disk.
- In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.
- When the file download is complete, click Close button.
Close all open windows. - Double-click the down loaded file GX260A09.EXE on your Desktop.
If the Security Warning window appears, click Yes. - Click the Setup button.
A black MS-DOS window appears. - Press the <Enter> key.
- Insert a formatted floppy disk in the floppy disk drive and press the <Enter> key.
- Press the <Y> key to begin copying files.
The message End of the disk set appears. - Press the <Enter> key.
- Click the Start button,
- Click the Run button.
- Type a: in
the Open box and click OK.
A list of files on the floppy disk appears. - Close all open windows and leave the disk in the floppy drive.
Skip to the section Flashing the BIOS below.
If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.
Return to Top
Non-Packaged Format
Creating the disk:
This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.
- Click Download now from the Download and install section, to begin.
The File Download window appears. - Click Save this program to disk.
- In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.
- When the file download is complete, click Close button.
Close all open windows. - Insert a blank, bootable, formatted 3.5-inch floppy disk.
- Right-click the downloaded file, point to Send Tothen click to select 3 1/2 Floppy (a), and skip to the section Flashing the BIOS
below.
Return to Top
Flashing the BIOS
NOTICE:
Changing the system BIOS may result in unintended side affects, such as
incompatibility of the new BIOS with installed hardware. If problems arise
after a BIOS change, it may be necessary to return the system to the
original version of the BIOS.
- If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power. - Ensure that the Flash BIOS disk is inserted into the floppy disk
drive. - Click the Start button, click Shut Down, click
Restart, then click OK.
The computer will restart
and boot to the floppy disk.
NOTE:
If the flash BIOS