Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Dell Server System BIOS, A06

AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
900 MHz B0 Stepping BIOS for PE8450.
Recommended

Find the best download for your system

Please enter your product details to view the latest driver information for your system

Search support

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

BIOS Release A06 contains B0 microcode to support 900MHz processors on
PE8450.
Read More

Version

A06, A06

Release date

28 Mar 2001

Download Type

System BIOS

Category

BIOS

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats

File Format: Extracts files directly to local disk
File Name: B6899R06.exe
File Size: 738.85 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Server System BIOS
This utility must be executed in a system without memory managers
installed.
If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update
is not safe. Remove any memory manager or exit Windows before executing
the FLASH Memory Update Utility.



I. BIOS Update
---------------

To update the BIOS, do the following:

1. Note the settings of the SETUP parameters. Enter SETUP by hitting
the F2 key during boot up. Write down the settings for each of
parameters. At the end of the BIOS update process you should set
the parameters to default values by hitting the F9 key, and then
re-enter these values you have written down.

2. Insert the BIOS Update Diskette into drive A:.

3. Reset the system.

4. System boots the BIOS Update Diskette.

5. Choose option 1 to update the BIOS.

6. System will automatically reboot once the BIOS update is completed.
Please remove the floppy diskette from drive A:.

7. Check to make sure the BIOS version is the new version as the
system reboots.

8. Enter Setup by pressing the F2 key during boot up. Once in Setup,
press the F9 to set the parameters back to default values.
Re-enter the values you wrote down at the beginning of this process.
If you do not set the CMOS values back to defaults using the F9
key, the system may function erratically.


II. BIOS Recovery
------------------

To recover the BIOS from a corrupted Flash or bad BIOS update, do the
following:

1. Turn system power off.

2. Move the BIOS recovery Switch number 2 to the recovery (ON) position.

3. Insert the BIOS recovery diskette containing the latest BIOS files
including user binary file.

4. Turn system power on.

5. At this point, the system boots from the DOS-bootable recovery
diskette without video display. BIOS emit one beep when it passes
control to DOS. DOS then execute a AUTOEXEC.BAT that contains
IFLASH.EXE. It emits one high pitched beep to indicate the beginning
of the flash operation. After it recovers system BIOS, it emits two
high pitched beeps. Then it recovers user binary code. It emits two
high pitched beeps to indicate the recovery completed successfully. If
the recovery fails, it emits a continuous series of beeps. The entire
process takes between three to five minutes.

6. Turn system power off.

7. Remove the recovery diskette.

8. Restore the switch to the original position.

9. Turn system power on for normal operation.


Note: you may encounter a CMOS Checksum error or other problem after
reboot. Try shutting down the system and booting up again. CMOS
checksum errors require that you enter Setup, check your settings, save
your settings, and exit Setup.

Need help with BIOS issues?

Find a solution in Dell's BIOS troubleshooting and usage guide.

Drivers help and tutorials