Outdated browser detected. We noticed you’re using an older version of Internet Explorer, and some of our site features might not look and behave the way you’d expect while using this browser version. For the best experience, please use Chrome or FireFox, or update Internet Explorer.
Studio XPS 9000 / 9100: Remove the System Board Assembly (00:03:16) This video is also relevant for the Studio XPS 9000. This information is provided as a guide to removing some of the more common and easily replaceable parts within this system. ***See Safety Precautions below*** Observe the following safety precautions before performing any installation or break/fix procedures involving disassembly or re-assembly: --Turn off the system and any attached peripherals. --Disconnect the system and any attached peripherals or cables, including disconnecting the AC power and system battery. --Disconnect any telephone or telecommunications lines from the system. --Use a wrist grounding strap and mat when working inside any computer system to avoid electrostatic discharge (ESD) damage. --After removing any system component, carefully place the removed component on an anti-static mat. --Wear shoes with non-conductive rubber soles to help reduce the chance of being shocked or seriously injured in an electrical accident.