Dell CMC, v.3.02, A01

AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Workaround for 2700W PSU 0G803N defect DF414125
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

Fixes and Enhancements in version 3.02 over 3.01
--------------------------------------
* Fix for racadm testfeature command

* Fix for power-up failure on M610X after OS crash. BIOS halts system
with error "Failed to allocate sufficient blade power".

* Link tuning updates for Dell 10GbE XAUI PTM, Dell M5424-n IOM, Qlogic FC8 mezzanine card
and Brocade Superhawk2 switch
En savoir plus

Version

3.02, A01

Date de publication :

06 oct. 2010

Type de téléchargement

Micrologiciels

Catégorie

Gestion des systèmes de châssis

Importance

Recommandé
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Formats disponibles

Format de fichier : Notes de publication externe
Nom du fichier : CMC-3.02-A01-README.txt
Taille du fichier : 8.38 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier contient du texte brut qui peut être affiché avec un éditeur de texte standard.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
939aea001ff353844f2161e7f49d02e1
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : Les paquets Dell pour le contrôleur de gestion de châssis (CMC) garantissent que les critères de validation spécifiques sont appliqués avant d'effectuer les mises à jour
Nom du fichier : firmimg-3.02-A01.cmc
Taille du fichier : 33.71 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les progiciels Dell Package pour contrôleur de gestion de châssis (CMC, Chassis Management Controller) garantissent que les critères de validation spécifiques sont appliqués avant d’effectuer les mises à jour.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
f9f6e715a458a0c5355c038a7fe01f8b
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : La signature pour les paquets Dell pour le contrôleur de gestion de châssis (CMC) peut être utilisée pour authentifier l'identité de Dell™ dans le paquet mis en corrélation pour CMC. Vous pouvez télécharger la clé GnuPG publique Dell en naviguant sur le site Internet Dell | Linux
Nom du fichier : firmimg-3.02-A01.cmc.sign
Taille du fichier : 194 Bytes
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
La signature pour les progiciels Dell Package pour contrôleur de gestion de châssis (CMC, Chassis Management Controller) peut être utilisée pour authentifier l’identité Dell dans le package mis en corrélation pour CMC. Vous pouvez télécharger la clé GnuPG publique Dell en parcourant le site Internet Dell | Linux.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
54381f40f3de379de83dde1da3d1d7d9
SHA1 :
Non disponible
SHA-256 :
Non disponible

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
Custom Instructions for firmimg-3.02-A01.cmc:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Custom Instructions for firmimg-3.02-A01.cmc.sign:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Verifying the Digital Signature
A digital signature is used to authenticate the identity of the signer of a file and to certify that the original content of the file has not been modified since it was signed.
If you do not already have it installed on your system, you must install the Gnu Privacy Guard (GPG) to verify the CMC Firmware digital signature. To use the standard verification procedure, perform the following steps:
1. Get the Dell Linux public GnuPG key, if you do not already have it. You can download it by navigating to lists.us.dell.com and clicking the Dell Public GPG key link or right click on the link and select “Save Target as…” This will save the Dell Public GPG key into a file linux-security-publickey.txt.
2. Import the public key to your gpg trust database by running the following command:
gpg --import
NOTE: You must have your private key to complete the process.
3. To avoid a distrusted-key warning, validate the public key by its fingerprint before you use it.
a. Type the following command:
gpg --edit-key 23B66A9D
b. Within the GPG key editor, type fpr. The following message appears:
pub 1024D/23B66A9D 2001-04-16 Dell, Inc. (Product Group)
Primary key fingerprint: 4172 E2CE 955A 1776 A5E6 1BB7 CA77 951D 23B6 6A9D
If the fingerprint of your imported key is the same as the key owner's, you have a correct copy of the key. You can verify the key's owner in person, over the phone, or by any other means that guarantees that you are communicating with the key's true owner.
You must import and validate the public key only once.
4. Obtain the CMC Firmware and its associated signature file from the Dell Support website at support.dell.com/support/downloads.
NOTE: Each CMC Firmware has a separate signature file, which is included in the zip package of the firmware. You need both the CMC Firmware and its associated signature file for verification. By default, the signature file is named the same as the CMC firmware filename with a .sign extension. For example, CMC firmware is named firmimg.cmc, its signature filename is firmimg.cmc.sign. To download the files, right-click on the download link and use the "Save Target As..." file option. Once downloaded extract these files to a known location.
5. Verify the CMC firmware:
NOTE: If you are in the GPG key editor, please make sure to exit from it before running the verify command.
gpg --verify

The following example illustrates the steps that you follow to verify a CMC Firmware package:
1. Download the following two files from support.dell.com:
- firmimg-3.02-A01.cmc.sign
- firmimg-3.02-A01.cmc
Import the public key by running the following command line:
gpg --import
The following output message appears:
gpg: key 23B66A9D: "Dell Computer Corporation (Linux Systems Group) " imported
gpg: Total number processed: 1
gpg: unchanged: 1
If you have already run this once, then the following output message appears.
gpg: key 23B66A9D: "Dell Computer Corporation (Linux Systems Group) " not changed
gpg: Total number processed: 1
gpg: unchanged: 1
3. Validate the Dell public key, if you haven't done so previously, by typing the following command:
gpg --edit-key 23B66A9D
At the command prompt, type the following commands:
fpr

4. Verify the CMC Firmware digital signature by running the following command:
gpg --verify firmimg-3.02-A01.cmc.sign firmimg-3.02-A01.cmc
The following output message appears:
gpg: Signature made [date] using DSA key ID 23B66A9D
gpg: Good signature from "Dell, Inc. (Product

Aide et didacticiels sur les pilotes