Intel Matrix Storage Manager pour ordinateurs de bureau, v.8.9.0.1023, A00

AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Intel Matrix Storage Manager Vista/Win7 64bit Driver (for pre-installation using the F6 method only)
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

Initial Release
En savoir plus

Version

8.9.0.1023, A00

Date de publication :

08 sept. 2009

Type de téléchargement

Pilote

Catégorie

Stockage

Importance

Recommandé
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Formats disponibles Afficher les informations importantes

Format de fichier : ZipPack externe
Nom du fichier : R230360.exe
Taille du fichier : 352.79 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur, puis exécutez-le (double-clic) pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
Non disponible
SHA1 :
Non disponible
SHA-256 :
Non disponible

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
For per-installation using F6 method only:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.

2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.

* Note: For Windows Vista you can use a floppy, CD/DVD or USB.

3. For Windows XP or later operating systems:

- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.

- When prompted, select 'S' to Specify Additional Device.

- Continue to step 5.

4. For Windows Vista:

- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.

- Continue to step 5.

5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.

6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.

7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
Custom Instructions for R230360.exe:

1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.

2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.

* Note: For Windows Vista you can use a floppy, CD/DVD or USB.

3. For Windows XP or later operating systems:

- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.

- When prompted, select 'S' to Specify Additional Device.

- Continue to step 5.

4. For Windows Vista:

- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.

- Continue to step 5.

5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.

6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.

7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.

8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.

Aide et didacticiels sur les pilotes