Seagate ST3750630AS 750GB LF S2 HDD, ST31000340AS 1TB LF S2 HDD, v.DE13, A01

AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:

ST3750630AS
ST31000340AS
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

The DE13 firmware corrects potential hang on power up. Drive will appear not accessible after hang.

Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:

ST3750630AS
ST31000340AS
En savoir plus

Version

DE13, A01

Date de publication :

03 أفريل 2009

Type de téléchargement

Matériel

Catégorie

Stockage

Importance

Critique
Dell Technologies recommande vivement d’effectuer cette mise à jour importante dès que possible. La mise à jour contient des correctifs critiques et des modifications permettant d’améliorer le fonctionnement, la fiabilité et la stabilité de votre système Dell. Elle peut également inclure des correctifs de sécurité et d’autres améliorations de fonctionnalités.
Formats disponibles

Format de fichier : ZipPack externe
Nom du fichier : R213714.EXE
Taille du fichier : 2.33 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur, puis exécutez-le (double-clic) pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
ead5c107eded39e0fab3cc5b65c1d89f
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : Une ou plusieurs images de disque dans un zip (tous à extraction automatique)
Nom du fichier : BR213714.exe
Taille du fichier : 1.03 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur et double-cliquez dessus pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
9f149fc41bb1cfa4c682134286eb67e3
SHA1 :
Non disponible
SHA-256 :
Non disponible

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
ST31000340AS 1TB LF S2 HDD
ST3750630AS 750GB LF S2 HDD
Custom Instructions for BR213714.exe:

* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *

* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *

(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)


For Bootable Diskette:

1. Perform a full backup of your data.
2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again.
3. Choose "Continue" in the next window to create a bootable
floppy.
4. Close all applications and restart system.
5. Press F12 and insert the floppy disk containing the firmware update.
6. Select boot from Floppy.
7. The Seagate Firmware Update will start automatically.
8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
9. Once completed, a message indicating process completion will appear.
10. Remove the floppy diskette and power off your system.
11. Power on your system to continue normal operation.
Custom Instructions for R213714.EXE:

* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *

* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *

(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)


For Bootable CD option

1. Perform a full backup of your data.
2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO".
5. Restart your system.
6. Press F12 and insert the CD containing the firmware update.
7. Select boot from CD/DVD.
8. The Seagate utility will start automatically.
9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
10. Once completed, a message indicating process completion will appear.
11. Remove the CD and power off your PC.
12. Power on your PC to continue normal operation.



For Bootable USB key option

1. Perform a full backup of your data.
2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. The files are located in "C:\DELL\Drivers\R213714\Files" directory.
5. Add the files to your bootable USB key.
6. Restart your system.
7. Insert your USB key containing the firmware update.
8. Press F12 and choose boot from USB
9. The Seagate utility will start automatically.
10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
11. Once completed, a message indicating process completion will appear.
12. Remove the Bootable Media and power off your system.

Aide et didacticiels sur les pilotes