Restart requiredOTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
This firmware release is a maintenance release for the 28xx version of PowerConnect switches and includes enhancements and bug fixes.
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
Fixes and Enhancements:
Enhancements: - Added a mode button to transition to various confiruations depending on the switch, as follows: > The current running configuration is automatically saved to local storage. If the system is switched to unmanaged mode via the Managed Mode button, the system does not load the saved configuration, but it is still maintained in the device's local storage mode > On PC2816/PC2824/2848 - A transition from Unmanaged or Secure mode to Managed mode via the use of the Managed Mode button results in the switch resetting automatically and returning to Managed mode while running the saved configuration (if no configuration exists, then the default configuration is used). > Transition from Unmanaged to Manged mode behaves differently, i.e. after mode button is pressed, device is automatically configured with IP address 192.168.2.1 and username admin (no password). User must connect to the device and select, via Restore Configuration WEBUI page, if device should return to previously saved configuration or to default configuration or to configuration loaded via TFTP. Only after this selection will the device reboot to managed mode with the chosen configuration.
Fixes: - Device does not flood BPDU when connected to a port with a specific source MAC address pattern (xx:xx:xx:xx:xx:81).
Dell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Dosya Biçimi:Dosyaları doğrudan yerel diske ayıklar
Dosya Adı:pc_28xx_10044.zip
Dosya Boyutu:7.15 MB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.