Adaptec CERC SATA 2s, v.6.0.50.5, A06

OTOMATİK OLARAK YÜKLENDİ Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Dell CERC SATA 1.5/2s RAID Controller Device Driver for Windows Server 2000 and Windows Server 2003 (32-bit).
Önerilen

Sisteminize en uygun indirmeyi bulun

Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin

Destek kaynaklarında ara

Dell Servis Etiketinizi veya modelinizi girin

Ürününüzü aramak mı istiyorsunuz? Bir ürün tanımlayıcısı girin. Nasıl yapılacağını göster

Bu sürücü uyumlu değil

Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.

Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.

Fixes & Enhancements

- corrects potential I/O performance issues on RAID 1 arrays in cases where a failed hard drive has not yet been removed from or replaced in the system.
- corrects potential system hang condition in cases when a failed hard drive has not been removed from the system
- corrects a potential issue caused by a variable not being cleared properly.
- corrects an issue seen with management software when retrieving serial numbers from hard disks.
- corrects an issue where certain error conditions were not returning sense data per SATA specification.

Read More

Version

6.0.50.5, A06

Sürüm tarihi

11 Eyl 2006

İndirme Türü

Driver

Kategori

Storage

Önem

Önerilen
Dell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Kullanılabilir biçimler View Important Information

Dosya Biçimi: MS Windows 32 Bit için Güncelleme Paketi
Dosya Adı: DRVR_WIN_R126743.EXE
Dosya Boyutu: 5.01 MB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.
MD5:
D2DBA12978EFD78B2F6CF9E47BAC762C
SHA1:
Not available
SHA-256:
Not available

Dosya Biçimi: ZipPack Harici
Dosya Adı: R126743.EXE
Dosya Boyutu: 250.66 KB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.
MD5:
d1aef73ede1e93a0f934e3124ae93474
SHA1:
Not available
SHA-256:
Not available

İndirdiğinizde, Dell Software Lisans Sözleşmesi’nin koşullarını kabul etmiş olursunuz.

Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Dell Update Package Instructions for DRVR_WIN_R126743.EXE:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.


Instructions for R126743.EXE

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.


Install

A. New OS Installation

1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S and providing the driver diskettes for them as prompted.
8. When all devices are specified, continue to the next step by pressing ENTER.

B. Driver Update Installation

Windows XP/Server 2003 Driver Update

1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Select "Adaptec Embedded Serial ATA HostRAID Controller" .
4. Select the "Driver" tab.
5. Click on "Update Driver".
6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step.
7. Choose "Install from a list of specific location (Advanced)", and click "Next".
8. Check "Include this location in the search:".
9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next".
10. Click "Finish".
11. If prompted to reboot to complete update, do so.

Windows Server 2000 Driver Update

1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Open "Adaptec Embedded Serial ATA HostRAID Controller".
4. Select the "Driver" tab.
5. Click on "Update Driver", then click next at the Driver Wizard welcome screen.
6. Select “Display a list of the known drivers for this device so that I can choose a specific driver”, then click next.
8. Click “Have Disk…”.
9. Enter the locations (hard drive or floppy) where you saved extracted files and click OK.
10. The located driver will be displayed on the, “Select a Device Driver “ page. Select the driver and then click next.
11. Click next on the, “Start Device Driver Installation” page.
12. Click “Finish”.
13. When prompted to restart the computer, click “Yes” to restart immediately (recommended) or click “No” to postpone the restart if necessary.

Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.


Sürücülerle ilgili yardım ve öğreticiler