Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell OptiPlex System BIOS, A06
OTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Optiplex GX50 A06 FlashBIOS
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
The following changes have been made to the A04 to create A06 (A05 was not released from Development): * Adjusted USB Emulation support for special keys, and non-US keyboards. * Added IDE UDMA support to speed up resume from Hibernate (when enabled). * Added support for new Processors. * Added support for additional models in the GX50 Series. * Reduce POST time when no PS/2 keyboard or Mouse installed. * Fixed issues with some USB devices causing a keyboard POST error with a USB keyboard. * Added two new diagnostic LED codes for better memory failure isolation. No Memory Detected (ABCD=Grn, Yel, Yel, Yel) Memory Configuration Failure (ABCD=Grn, Yel, Grn, Yel) * Fixed false error on Floppy Drive when running Diags From Bootable Diags CD without a Floppy Drive.
* Fixed possible CMOS corruption when adjusting system configuration through Open Manage.
* Allow Num-pad Enter key on boot menu screen.
* Changed the AC Power Recovery to OFF as default.
* Added "Low Power Mode" option to System Setup.
* Fixed issue with UNKNOWN devices in System Setup for IDE devices. If a failure occurs, now check the second IDE cable for devices.
* Fixed hang problem with Creative Audigy and large sound samples.
* Fixed issue when resuming from Hibernate with keyboard & mouse swapped.
Dell Technologies, sisteminiz için geçerli olup olmadığını belirlemek için bu güncellemeyi incelemenizi önerir. Bu güncelleme, yalnızca belirli yapılandırmaları etkileyen değişiklikler içerir veya ortamınız için geçerli olabilecek ya da olmayabilecek yeni özellikler sağlar.
Dosya Biçimi:One or more self extracting disk images inside of a self extracting zip
Dosya Adı:BGX50_06.exe
Dosya Boyutu:490 KB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Dosya Biçimi:Flash BIOS executable
Dosya Adı:GX50_A06.EXE
Dosya Boyutu:316.68 KB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Non-Packaged Creating the disk: NOTE: This procedure requires one blank bootable, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Insert the blank bootable formatted 3.5-inch floppy disk. 7. Right-click the copy of the file, point to “Send To”, click “3 1/2 Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS: NOTICE: Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS. 1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power. 2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive. 3. Click the “Start” button, click “Shut Down”, click “Restart”, and then click “Ok”. The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\ prompt, refer to the instructions from the Dell File Library page for the BIOS update or to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears. 4. Press the “Enter” key. A Press Y to replace old BIOS with new BIOS prompt appears. 5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.
When the computer has finished updating the BIOS, a Flash program successful. Press any key to reboot prompt appears. 6. Remove the floppy disk and press the “Enter” key. 7. The computer will now restart with the new revision of the BIOS installed. The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS, enter the System Setup, clear the NVRAM and restore the system defaults. For more information, refer to Dell Knowledge Base Articles: · FA1035264 Title "How do I restore setup defaults on my Dell OptiPlex system?" · FA1035227 Title "How do I clear NVRAM on my Dell OptiPlex system?"
Floppy Disk Boot to Disk for BGX50_06.exe
Download
1. Click Download Now, to download the file. 2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. 5. Insert a floppy disk into the floppy disk drive. 6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 7. Press the [y] key and then press the [ENTER] key. The files are copied to
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.