OTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Management information bases (MIBs) are a collection of definitions, which define the properties of the managed object within the device to be managed. Every managed device keeps a database of values for each of the definitions written in the MIB. It is not the actual database itself - it is implementation dependant. Definition of the MIB conforms to the SMI given in RFC 1155. Internet MIB is given in RFC 1213 sometimes called the MIB-II
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
1. staPortProtocolMigration OBJECT-TYPE DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."
2. staPortAdminEdgePort OBJECT-TYPE
DESCRIPTION "The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port."
3. staPortOperEdgePort OBJECT-TYPE DESCRIPTION "The operational value of the Edge Port parameter. The object is initialized to the value of staPortAdminEdgePort and is set FALSE when a BPDU is received."
4. staPortAdminPointToPoint OBJECT-TYPE DESCRIPTION "The administrative point-to- point status of the LAN segment attached to this port. A value of forceTrue (0) indicates that this port should always be treated as if it is connected to a point-to- point link. A value of forceFalse(1)indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either Through auto-negotiation or by management means."
5. staPortOperPointToPoint OBJECT-TYPE DESCRIPTION "The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object."
6. staPortLongPathCost OBJECT-TYPE DESCRIPTION "The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port.
This object is used to configure the spanning tree port path cost in 32 bits value range when the staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not instantiated."
7. staProtocolType OBJECT-TYPE DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available."
8. staTxHoldCount OBJECT-TYPE DESCRIPTION "The value used by the Port Transmit state machine to limit the maximum transmission rate."
9. staPathCostMethod OBJECT-TYPE DESCRIPTION "Indicates the type of spanning tree path cost mode Configured on the switch. This mode applies to all instances of the Spanning tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the staPortLongPathCost MIB object must be used to retrieve/configure the spanning tree port path cost as a 32 bit value. The set
Dell Technologies, sisteminiz için geçerli olup olmadığını belirlemek için bu güncellemeyi incelemenizi önerir. Bu güncelleme, yalnızca belirli yapılandırmaları etkileyen değişiklikler içerir veya ortamınız için geçerli olabilecek ya da olmayabilecek yeni özellikler sağlar.
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Hard Drive Installation (via WinZip) with Setup.exe File for R62192.EXE
Download
1.Click Download Now, to download the file. 2.When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4.If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R62192.EXE. 2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\r62192. Write down this path so the executable (I.e. Setup.exe) file can be found later. 3.The Self-Extractor window appears. 4.Click OK. 5.After completing the file extraction, if the Self-Extractor window is still open, close it. 6.Click the Start button and then click Run. 7.Type C:\DELL\DRIVERS\r62192 in the Open textbox and then click OK. 8.Follow the on-screen installation instructions.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.