Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell PowerVault BIOS, A08
OTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
PowerVault 725N BIOS A08
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
1. Fixes issue in which a PV725N with BIOS A07 and Adaptec SCSI card 39160 BIOS version 2.57.2s2 will report that no hard drives are available.
Dell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Dosya Biçimi:Dosyaları doğrudan yerel diske ayıklar
Dosya Adı:PV725N_A08.exe
Dosya Boyutu:681 KB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files.
Note: The default extract path is c:\Dell\PV725N
4. Click on the OK button to extract files. 5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation 1. Copy the BIOS file A08.rom to the PowerVault 725N system. 2. Open a Windows Explorer window on the PowerVault 725N by using a direct attached Keyboard, monitor, and mouse or by using the Terminal Service Advanced Client located in the PowerVault NAS Manager web interface. 3. Browse to "C:\Dell\Flash Utility". 4. Double click WinSFI to open the AMI WinFlash Utility. 5. In the AMI WinFlash window, ensure only the NVRAM Programming box is checked. 9. In the File drop-down menu, select Load BIOS and Flash. 10. When the Open window appears, use the folder's navigation icons to navigate to the folder you placed the downloaded BIOS file in. 11. Click Open. 12. When a message appears asking if you are sure you want to update the BIOS, click Yes. 13. After the BIOS update is complete, a message will appear stating the flash ROM update is complete and asks if you want to restart your system. Click Yes.
Note: Your system will reboot after clicking Yes.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.