Restart requiredOTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
Fixes - Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements - Enhanced the device ready time, allowing system to be able to power up quickly.
Dell Technologies, sisteminiz için geçerli olup olmadığını belirlemek için bu güncellemeyi incelemenizi önerir. Bu güncelleme, yalnızca belirli yapılandırmaları etkileyen değişiklikler içerir veya ortamınız için geçerli olabilecek ya da olmayabilecek yeni özellikler sağlar.
1. Equipment needed, a CD drive, a blank CD. 2. Do not POWER OFF the system during the firmware update procedure. 3. Please perform a full system backup before starting the firmware update procedure (highly recommended). 4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended). 5.The firmware utility tool is OS independent.
Backup 1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction 1. Click Download File to download the zipped file. 2. Extract the file into a folder. 3. The ISO image file is used to burn the utility onto a bootable CD.
Installation 1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended). 2. DO NOT remove power from the system during the firmware update process. 3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode. 4. Ensure that your BIOS boot order has been set up to boot from CD drive a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting. 5. Insert the bootable CD media with ISO image into your system. 6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically. 7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen. 8. Select Yes to the request 'Update firmware on this drive?' 9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete. 10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.