OTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Dell OpenManage Network Manager delivers you automated, consolidated configuration and control of Dell PowerConnect switches. Comprehensive network management capabilities include:
• Monitoring and management of PowerConnect switches • Automation of labor-intensive and common network management operations to lower the total cost of ownership for PowerConnect switch administrators • Advanced network element discovery, remote configuration management, and system health monitoring to proactively alert network administrators to potential network problems. Network Manager is customizable, and it unifies multiple systems while still allowing event and trap forwarding to other enterprise network management systems.
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
IMPORTANT: Network Manager can only be installed as an initial install or upgraded from version 4.3.
This version of Network Manager adds support for several Powerconnect J-Series, B-Series, and W-Series devices. Other features in 4.x are: • A free license is included to manage up to 10 devices. You can continue to manage any number of devices when upgrading from previous versions containing previously discovered devices, but will be required to purchase an additional license to discover additional devices. If after an upgrade you have more devices discovered than you have a license for, you will only be able to remove the devices and not be allowed to add any device until you drop below the license limit (unless you purchase an additional license). Once the number of devices fall below the licensed amount, the license limit goes into effect.
Dell Technologies, sisteminiz için geçerli olup olmadığını belirlemek için bu güncellemeyi incelemenizi önerir. Bu güncelleme, yalnızca belirli yapılandırmaları etkileyen değişiklikler içerir veya ortamınız için geçerli olabilecek ya da olmayabilecek yeni özellikler sağlar.
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Dell previously released free versions of this application allowing unlimited devices to be discovered and managed. With 4.x versions, unless you purchase and install an additional license, OpenManage Network Manager 4.x will limit the number of devices you can manage to 10. You can purchase additional licenses by contacting your sales representative or go to www.dell.com/networking.
If you have not installed an additional license or choose not to purchase additional licenses at this time, you can still upgrade to this version and retain/manage all of your previously discovered devices. However, you will not be able to discover any additional devices including newly supported devices unless you are below your installed license limit. Also, each time you remove a device from discovered devices, you will not be allowed to add the device back unless you are below the installed license limit.
As always, it is recommended that you backup your OMNM database if you are upgrading. Refer to the User Guide that came with this application for backup procedures.