OTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
This utility updates the SCSI Seagate Cheetah 15K Drives firmware to DX10. This version addresses compatibility issues when drives are installed in U320 capable PV220/PV221S enclosures and other general quality improvements. The following Seagate drives are supported by this release: Seagate Model # ST318453LW Seagate Model # ST318453LC Seagate Model # ST336753LW Seagate Model # ST336753LC Seagate Model # ST373453LW Seagate Model # ST373453LC
Önerilen
Sisteminize en uygun indirmeyi bulun
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
No results found.We couldn't find anything for your search. Please modify your search and try again.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
This version corrects issues found with drives going intermittently Off-line, or a hang condition with drives installed in U320 capable PV220/PV221S systems.
Dell Technologies, bu önemli güncellemeyi mümkün olan en kısa sürede uygulamanızı kesinlikle önerir. Bu güncelleme, Dell sisteminizin işlevselliğini, güvenilirliğini ve kararlılığını iyileştirmeye yönelik kritik hata düzeltmeleri ve değişiklikler içerir. Ayrıca güvenlik düzeltmeleri ve başka özellik iyileştirmeleri de içerebilir.
Dosya Biçimi:One or more self extracting disk images inside of a self extracting zip
Dosya Adı:BR71411.exe
Dosya Boyutu:873.64 KB
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation 1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 2. Insert a blank diskette then click Continue. 3. After all the files have been copied to the last, click Finish.
Installation: NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
If PERC3/xx, PERC4/xx is selected, the user is prompted to select the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ? 2)Update Drives connected to Channel 1 of PERC3 ? 3)Update Drives connected to Channel 2 of PERC3 ? 4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all SCSI Seagate 15K U320 devices found.
Once the update is complete Remove the diskette and reboot the system.