PowerConnect,2800,V1.0.0.44,A06,V2

需要重新啟動

此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。

This firmware release is a maintenance release for the 28xx version of PowerConnect switches and includes enhancements and bug fixes.

建議

為您的系統尋找最適合的下載項目

請輸入產品的詳細資料以檢視系統的最新驅動程式資訊

搜尋支援

輸入您的 Dell 產品服務編號或型號

想要尋找您的產品嗎？請輸入產品識別碼。告訴我怎麼做

修復及強化

Fixes and Enhancements:

Enhancements:
- Added a mode button to transition to various confiruations depending on the switch, as follows:
> The current running configuration is automatically saved to local storage. If the system is switched to unmanaged mode via the Managed Mode button, the system does not load the saved configuration, but it is still maintained in the device's local storage mode
> On PC2816/PC2824/2848 - A transition from Unmanaged or Secure mode to Managed mode via the use of the Managed Mode button results in the switch resetting automatically and returning to Managed mode while running the saved configuration (if no configuration exists, then the default configuration is used).
> Transition from Unmanaged to Manged mode behaves differently, i.e. after mode button is pressed, device is automatically configured with IP address 192.168.2.1 and username admin (no password). User must connect to the device and select, via Restore Configuration WEBUI page, if device should return to previously saved configuration or to default configuration or to configuration loaded via TFTP. Only after this selection will the device reboot to managed mode with the chosen configuration.

Fixes:
- Device does not flood BPDU when connected to a port with a specific source MAC address pattern (xx:xx:xx:xx:xx:81).