LSI Logic PERC3/DC-Workstations, v.5.21, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Creates PERC3/DC SCSI RAID Controller W2K driver diskettes.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
None.
閱讀更多繁體中文版
5.21, A00
發佈日期
25 5月 2001
下載類型
驅動程式
類別
SCSI RAID
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： D2D19600.exe
檔案大小： 235.35 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Windows 2000
安裝指示
1. Download the file from the Dell website to your hard drive. It is recommended you download it to your desktop for easy access.
2. Place a known good formatted floppy disk in your floppy disk drive.
2. Double-click on the file you just downloaded.
3. Follow the on screen instructions. The program will create a floppy disk with the RAID drivers.
4. Reboot the computer and enter Set Up. To enter set up hit the F2 key at the Dell Screen.
5. In Set Up enter the computer’s boot sequence and set the computer to boot up from CDROM.
6. Place NT reinstallation CD in the CDROM drive. Hit the Escape key and save changes and reboot.
7. On reboot the Windows 2000 installation will begin after you hit the space when the on screen message says HIT ANY KEY TO BOOT FROM CDROM.
8. When you see the screen – COULD NOT FIND ONE OR MORE OR YOUR MASS STORAGE DEVICES – at the bottom of the screen you will see – HIT “S” TO SPECIFY – hit the “S” key.
9. On the next screen hit the “O” key to choose OTHER.
10. When the computer asks for the Manufactures diskette place the floppy disk you just created in the floppy disk drive. This will install the RAID drivers. After the driver install continue with your Windows 2000 installation.
***Please see the release notes (Relnote.txt) on the diskette for complete installation instructions***
2. Place a known good formatted floppy disk in your floppy disk drive.
2. Double-click on the file you just downloaded.
3. Follow the on screen instructions. The program will create a floppy disk with the RAID drivers.
4. Reboot the computer and enter Set Up. To enter set up hit the F2 key at the Dell Screen.
5. In Set Up enter the computer’s boot sequence and set the computer to boot up from CDROM.
6. Place NT reinstallation CD in the CDROM drive. Hit the Escape key and save changes and reboot.
7. On reboot the Windows 2000 installation will begin after you hit the space when the on screen message says HIT ANY KEY TO BOOT FROM CDROM.
8. When you see the screen – COULD NOT FIND ONE OR MORE OR YOUR MASS STORAGE DEVICES – at the bottom of the screen you will see – HIT “S” TO SPECIFY – hit the “S” key.
9. On the next screen hit the “O” key to choose OTHER.
10. When the computer asks for the Manufactures diskette place the floppy disk you just created in the floppy disk drive. This will install the RAID drivers. After the driver install continue with your Windows 2000 installation.
***Please see the release notes (Relnote.txt) on the diskette for complete installation instructions***