American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.6.35.2.32, A02
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Dell PowerEdge RAID Controller 2/DC and 2/SC Device Driver for Windows 2003.
Version 6.35.2.32
Version 6.35.2.32
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes or Enhancements in this Release
Enhancements:
1) None
Fixes:
1) Minor change to Oemsetup.txt file.
2) Driver no longer filters out all other commands except SCSI READ and SCSI WRITE
閱讀更多Enhancements:
1) None
Fixes:
1) Minor change to Oemsetup.txt file.
2) Driver no longer filters out all other commands except SCSI READ and SCSI WRITE
繁體中文版
6.35.2.32, A02
發佈日期
15 3月 2004
下載類型
驅動程式
類別
SCSI RAID
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 適用於 MS Windows (32 位元) 的更新套件
檔案名稱: RAID-DRVR-R65396.exe
檔案大小: 1.09 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計,可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時,請務必選擇適用您作業系統的更新。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
174753AA1DFEBE31CF7CF990BA907E0D
SHA1:
不適用
SHA-256:
不適用
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: PERC2-W2K3-6.35-A02.exe
檔案大小: 124 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Custom Instructions for PERC2-W2K3-6.35-A02.exe:
Dell PowerEdge RAID Controller 2/SC, 2/DC, 4/DC, 4/SC, 3/QC, 3/DC,
3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for
Windows Server 2003.
Version 6.35.2.32
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files – the instructions below assume you extract files to a formatted floppy disk.
3. Click on the unzip button to extract files.
Installation
Dell PowerEdge RAID Controller 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for Windows Server 2003.
Version 6.35.2.32
Installing on a new driver on a Windows Server 2003 system
1) Boot the system using the Windows Server 2003 CD. As the message "Press F6 if you need to install a third party SCSI or RAID driver." appears, press F6 immediately.
2) Within a few minutes, a screen appears that asks for additional adapters in the system. Choose 'S'.
3) You are prompted for the driver diskette. Insert the PERC/CERC Windows Server 2003 driver diskette in the floppy drive and press Enter.
4) A list of drivers for PERC/CERC controllers appears. Select the right driver for your installed controller and press Enter to load the driver.
5) A statement is presented saying the driver that you provided is older/newer then the Windows driver.
Press 'S' to use the driver on the floppy.
6) Press Enter again to continue installation process as usual.
Adding the PERC/CERC Driver to an Existing Windows Server 2003.
1) Boot the system to Windows 2003. The Found New Hardware Wizard displays.
2) If you are installing the PERC 3/SC, PERC 4/DC, PERC 4/SC, PERC 4/DI or CERC ATA100/4CH, click on Next and skip to step 5. Otherwise, click Cancel on all the new devices.
3) Restart the system from the shutdown menu.
4) The Found New Hardware Wizard displays again when the system boots to Windows Server 2003. Click on Next.
5) Select Search for a suitable driver and click "Next" to continue.
6) Select Floppy disk drive, insert the PERC/CERC Windows 2003 driver diskette created above and click Next to continue.
7) Continue to click on Next and finish the installation.
8) The Found New Hardware Wizard screen appears one time for each PERC 3/SC, PERC 4/SC, PERC 4/DC controller, three times for each PERC 3/DC or PERC 3/DCL controller and four times for each PERC 3/QC. Repeat steps 5 - 7 for each time the wizard displays to complete installation of the card.
9) To confirm driver installation, right click on My Computer and select Manage. Click on Device Manager, then click on SCSI and RAID controllers to see the newly added PERC 3 controller(s) in the list.
After finishing the driver update, YOU MUST REBOOT YOUR SERVER.
Updating the PERC/CERC Driver on an Existing Windows Server 2003.
If your server is already running Windows Server 2003, use the following steps to update the PERC Windows Server 2003 driver.
Note: If your driver supports multiple RAID controllers, make sure to upgrade all the RAID controllers in your system that your driver supports.
1) Insert the PERC/CERC Windows Server 2003 driver diskette.
2) Position the mouse pointer to the my computer icon in the Start menu and right click and select Manage.
3) Position the mouse pointer on Device Manager and click the left mouse button.
4) Position the mouse pointer on SCSI and RAID controllers and double click.
5) Select the PERC controller and double click.
6) Select the Driver tab.
7) Select Update Driver.
The Upgrade Device Driver Wizard disp