Dell 11G CPLD, v.1.5.0, A01
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This file provides the CPLD v.1.5.0 release to support R910 II new features.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
Fixed update utility support for CPLD version numbers including hex digits 0xA-0xF.
閱讀更多Fixed update utility support for CPLD version numbers including hex digits 0xA-0xF.
繁體中文版
1.5.0, A01
發佈日期
06 12月 2011
下載類型
韌體
類別
裝置韌體
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更,可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
檔案格式: 快閃 BIOS 執行檔
檔案名稱: R910_cpld_150.exe
檔案大小: 268.88 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式包含 BIOS 可執行檔。若要更新您的系統,請下載該檔案並將其儲存至您的桌面或硬碟,然後執行可執行檔。若要更新 BIOS,您的系統必須接上交流電源,而且電池電量至少需達 10% 以上。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
f154f9c24f5a999c25d70077683823b2
SHA1:
不適用
SHA-256:
不適用
檔案格式: 外部版本資訊
檔案名稱: R910-CPLD-ver150-A01_External_Release_Notes.txt
檔案大小: 533 Bytes
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含純文字,可使用標準文字編輯器予以檢視。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
2eb29f99bee27e1f3f4d6caf5d8500b7
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
It is recommended to review the "Intel Xeon Processor E7-2800/4800/8800 Product Family Information Update" before installing this firmware.
This document can be downloaded at:
http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r810_User's%20Guide4_en-us.pdf?c=us&l=en&cs=&s=gen
This document can be downloaded at:
http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r810_User's%20Guide4_en-us.pdf?c=us&l=en&cs=&s=gen
11G CPLD
Download
1. Click 'Download Now' to download the file.
2. Save the driver package to a local location.
Installation:
1. Place the file onto a DRMK8-compatible bootable disk (e.g., floppy, USB key, etc.)
2. Run "mcpld150" from the command prompt and enter "Y" when prompted to update CPLD.
3. Upon completion of update, press any key to cycle the system for the update to take effect. (Alternately, run "mcpld150 -force" to execute the entire sequence without further user intervention.)
1. Click 'Download Now' to download the file.
2. Save the driver package to a local location.
Installation:
1. Place the file onto a DRMK8-compatible bootable disk (e.g., floppy, USB key, etc.)
2. Run "mcpld150" from the command prompt and enter "Y" when prompted to update CPLD.
3. Upon completion of update, press any key to cycle the system for the update to take effect. (Alternately, run "mcpld150 -force" to execute the entire sequence without further user intervention.)