LSI 9265-8i SAS RAID Card firmware
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
LSI 9265-8i SAS RAID Card firmware
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
1.Dont log capacity change event post rebuild completion.
2.Log commission event only if Rebuild will start on the PD.
3.Clean up bad block list during background init/check consistency failure
4.Reverted back the changes of the issues: SCGCQ00287136 & SCGCQ00287140.
5.SATA BBM list corruption
6.Stressing test on degrade raid with drives or rebuilding on drives will cause firmware hang
7.T-bolt firmware : makes unconfigured bad (foreign) to unconfigured bad on reboot.
8.cannot make the CacheCade configured PD as unconfigured bad even pulling it out during system online.
9.Hot Spare lost after FW update
10.Pulling cable when maintainpdfailhistory=1 create wrong state in arrays.
11.Memory test does not execute when performing FW diagnostics.
12.MFC variable enableSSCWB was not getting updated when updated via megaSCU
13.Code review: DC : Set RDM_FLAGS_FUA_REQ in immediate IO path in rebuilding drive case.
14.Controller does not come up while a PD Erase is in progress_Debug Firmware
閱讀更多2.Log commission event only if Rebuild will start on the PD.
3.Clean up bad block list during background init/check consistency failure
4.Reverted back the changes of the issues: SCGCQ00287136 & SCGCQ00287140.
5.SATA BBM list corruption
6.Stressing test on degrade raid with drives or rebuilding on drives will cause firmware hang
7.T-bolt firmware : makes unconfigured bad (foreign) to unconfigured bad on reboot.
8.cannot make the CacheCade configured PD as unconfigured bad even pulling it out during system online.
9.Hot Spare lost after FW update
10.Pulling cable when maintainpdfailhistory=1 create wrong state in arrays.
11.Memory test does not execute when performing FW diagnostics.
12.MFC variable enableSSCWB was not getting updated when updated via megaSCU
13.Code review: DC : Set RDM_FLAGS_FUA_REQ in immediate IO path in rebuilding drive case.
14.Controller does not come up while a PD Erase is in progress_Debug Firmware
繁體中文版
23.7.0-0035, A01
發佈日期
19 2月 2013
下載類型
韌體
類別
SAS RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: 23.7.0-0035_SAS_FW_IMAGE_APP_3.190.15-1776.exe
檔案大小: 27.82 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
1202385f68ac221bc67a0ab0f9d79b64
SHA1:
cc7903ebc9e924f265db86d7f8b3ad6547e0aad0
SHA-256:
17bb60ca77d368ccdf2ab32e14dd5e5658014da0558678967109a238439e4d97
檔案格式: 文字檔案包含方便客戶使用的修復及強化資訊
檔案名稱: EndUser LicenseAgreementType S_Rev. 040512.txt
檔案大小: 11.4 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含純文字,可使用標準文字編輯器予以檢視。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
c2ffe409366d225552ac6ed58f206b58
SHA1:
88522584d2ed8711c12c71ae9e569116a26e7b0a
SHA-256:
b85aae437264a3f053c9efec6b47fa1ba6610de28b749a06c2fec3dfc87bf333
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
LSI 9265-8i MegaRaid SAS
Use MegaCLI to flash the SAS controllers.
please unzip the MegaCLI update utility in attachment.
Command syntax: MegaCli -adpfwflash -f mr2208fw.rom -a0
please unzip the MegaCLI update utility in attachment.
Command syntax: MegaCli -adpfwflash -f mr2208fw.rom -a0