Dell 180AS/2160AS Analog KVM Switch, v.1.0.3.3, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Updated firmware for the 180AS and 2160AS analog KVM switches and the supporting Server Interface Pods (SIPs).
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Enhancement to enable recognition of PowerEdge M1000e blade server CMC module.
閱讀更多繁體中文版
1.0.3.3, A00
發佈日期
06 4月 2009
下載類型
韌體
類別
裝置韌體
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: ZipPack 外接
檔案名稱: Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe
檔案大小: 937.95 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
9bfd6949d776c1f02e7fba174f09289c
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
180AS/2160AS Analog KVM Switch
Instructions for Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.