Dell PowerVault MD 32/36 Series Storage Controller Firmware and NVSRAM firmware version 07.84.44.60
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Dell PowerVault MD 32/36 Series Storage Array
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
繁體中文版
07.84.44.60, A00
發佈日期
04 12月 2012
下載類型
韌體
類別
儲存控制器
重要性
重大Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更，可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
可用的格式 檢視重要資訊
檔案格式： 韌體影像
檔案名稱： MD3200_MD3220_Firmware_Package_07_84_44_60.zip
檔案大小： 58.74 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
為了確保下載的完整性，請驗證總和檢查值。
MD5：
8ee92746a87a8d06f9d5b854e6952d6d
SHA1：
ab593f4d48a9977ea351ebeea13d910c677b22d2
SHA-256：
38fb5694caacbc77c8086a01c6923cbb8cbc1f2c6271f4dba4f476088bf2b490
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
This update is recommended for all PowerVault MD 32/36 storage arrays.
This release contains the following features:
- Consolidated support for both 60-disk 4U (dense) and 12/24-disk 2U MD Series storage arrays.
- Resolves a potential I/O path error between Fibre Channel chip and RAID Controller memory
- Resolves a potential I/O Path error when using VMware vSphere 5.X when VAAI hardware accelerated VMFS data movement is enabled for VM migration, VMware snapshots, and VM cloning.
- Resolves Incorrect Drawer number when assigning Hot spare
- New features for 60-disk 4U (dense) MD Series storage arrays are:
- Enhanced snapshot functionality based on point-in-time (PiT) images
- Asynchronous remote replication (iSCSI and FC-based)
- Thin provisioned virtual disks
- SSD cache configuration and SSD performance modeling
- Windows Server 2012 (Standard and Datacenter)
- Windows 8
- New features for 12/24-based 2U MD Series storage arrays are:
- Adaptive disk pooling
- Redesigned MD Storage Manager interface
- Automatic support daya collection across multiple arrays
- VMware vStorage APIs for Array Integration (VAAI)
- Enhanced snapshot functionality based on point-in-time (PiT) images
- Asynchronous remote replication (iSCSI and FC-based)
- Thin provisioned virtual disks
- SSD cache configuration and SSD performance modeling
- Windows Server 2012 (Standard and Datacenter)
- Windows 8
This release contains the following features:
- Consolidated support for both 60-disk 4U (dense) and 12/24-disk 2U MD Series storage arrays.
- Resolves a potential I/O path error between Fibre Channel chip and RAID Controller memory
- Resolves a potential I/O Path error when using VMware vSphere 5.X when VAAI hardware accelerated VMFS data movement is enabled for VM migration, VMware snapshots, and VM cloning.
- Resolves Incorrect Drawer number when assigning Hot spare
- New features for 60-disk 4U (dense) MD Series storage arrays are:
- Enhanced snapshot functionality based on point-in-time (PiT) images
- Asynchronous remote replication (iSCSI and FC-based)
- Thin provisioned virtual disks
- SSD cache configuration and SSD performance modeling
- Windows Server 2012 (Standard and Datacenter)
- Windows 8
- New features for 12/24-based 2U MD Series storage arrays are:
- Adaptive disk pooling
- Redesigned MD Storage Manager interface
- Automatic support daya collection across multiple arrays
- VMware vStorage APIs for Array Integration (VAAI)
- Enhanced snapshot functionality based on point-in-time (PiT) images
- Asynchronous remote replication (iSCSI and FC-based)
- Thin provisioned virtual disks
- SSD cache configuration and SSD performance modeling
- Windows Server 2012 (Standard and Datacenter)
- Windows 8
支援的作業系統
Novell SuSE Linux ES 11
VMware ESXi 4.1
VMware ESXi 5.0
Windows Server 2008 x64
Suse Linux ES 10
Windows Server 2012
Microsoft Hyper-V
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows Vista, 32-bit
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
MS Windows Vista 64 位元
Windows XP
Windows Server 2003 x64
VMware ESX 4.1
VMware ESXi 5.1
適用於
MD3 Series Controller Firmware Updates
安裝指示
*** ATTENTION ***
If your PowerVault MD3200/MD3220-series storage array is currently running a firmware version lower than 07.75.28.60, you cannot directly install the RAID controller firmware version 07.84.44.60 included in this release.
Instead, you must first install the bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.84.44.60.
Specifically, follow these steps:
1. *** IMPORTANT *** Install Dell PowerVault MD Storage Manager (MDSM) software from the Resource DVD version 4.1.0.88 or higher.
2. Extract the following files from the MD3200_MD3220_Firmware_and_NVSRAM_Files.zip archive:
* Bridge_Firmware_07_75_28_60.dlp
* MD3200_MD3220_Firmware_07_84_44_60.dlp
* MD3200_MD3220_NVSRAM_N26X0-784890-004.dlp
3. Download and activate RAID controller bridge firmware version 07.75.28.60 (contained in the Bridge_Firmware_07_75_28_60.dlp file)
4. Once the bridge firmware installation is successfully completed, wait at least 30 minutes to allow the attached hosts to re-discover the storage array.
5. Download and activate the RAID controller firmware version 07.84.44.60 (contained in the MD3200_MD3220_Firmware_07_84_44_60.dlp file) together with the NVSRAM configuration file version N26X0-784890-004 (contained in the MD3200_MD3220_NVSRAM_N26X0-784890-004.dlp file).
*** WARNING ***
If you have a single controller PowerVault MD3200/MD3220-series storage array you must stop all I/O operations before starting the RAID controller firmware upgrade.
If your PowerVault MD3200/MD3220-series storage array is currently running a firmware version lower than 07.75.28.60, you cannot directly install the RAID controller firmware version 07.84.44.60 included in this release.
Instead, you must first install the bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.84.44.60.
Specifically, follow these steps:
1. *** IMPORTANT *** Install Dell PowerVault MD Storage Manager (MDSM) software from the Resource DVD version 4.1.0.88 or higher.
2. Extract the following files from the MD3200_MD3220_Firmware_and_NVSRAM_Files.zip archive:
* Bridge_Firmware_07_75_28_60.dlp
* MD3200_MD3220_Firmware_07_84_44_60.dlp
* MD3200_MD3220_NVSRAM_N26X0-784890-004.dlp
3. Download and activate RAID controller bridge firmware version 07.75.28.60 (contained in the Bridge_Firmware_07_75_28_60.dlp file)
4. Once the bridge firmware installation is successfully completed, wait at least 30 minutes to allow the attached hosts to re-discover the storage array.
5. Download and activate the RAID controller firmware version 07.84.44.60 (contained in the MD3200_MD3220_Firmware_07_84_44_60.dlp file) together with the NVSRAM configuration file version N26X0-784890-004 (contained in the MD3200_MD3220_NVSRAM_N26X0-784890-004.dlp file).
*** WARNING ***
If you have a single controller PowerVault MD3200/MD3220-series storage array you must stop all I/O operations before starting the RAID controller firmware upgrade.