LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, PERC 4/Di, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, v.1.03, A02
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
MegaPR for Windows is a utility that allows the user to start and stop Patrol Read on specified PERC controllers from the Windows environment. MegaPR can also display the current status of Patrol Read on a given PERC controller. Online help is available by typing 'MegaPR ?'. For further information concerning Patrol Read, see the latest PERC User's Guide on http://support.dell.com.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Initial Release of MegaPR for Windows.
閱讀更多繁體中文版
1.03, A02
發佈日期
07 6月 2005
下載類型
公用程式
類別
SCSI RAID
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： MegaPR_Windows_A02.exe
檔案大小： 108 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
檔案格式： 外部版本資訊
檔案名稱： MegaPR_Windows_A02.txt
檔案大小： 4.66 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
- MegaPR for Windows requires a minimum level of firmware in order to operate with a PERC controller.
- MegaPR for Windows is only supported on firmware versions listed in the MegaPR Release Notes document or later versions. Do not run MegaPR on controllers with firmware older than the versions listed in the Compatibility/Minimum Requirements section of the MegaPR Release Notes.
- MegaPR will display 'Option not supported for adp 0' for any operations attempted when Patrol Read mode for the controller is set to Disable. The adapter number referenced in the message will correspond to the adapter number specified in the MegaPR command. The Patrol Read mode must be set to Auto or Manual for MegaPR to start or stop a PR iteration. To change the Patrol Read mode on an adapter, enter the PERC BIOS configuration utility by pressing CTRL+M at controller initialization during system POST. Go to Objects, and then select the Adapter menu. If multiple adapters are in the server, select the appropriate adapter. Now choose Patrol Read Options. Change the Patrol Read Mode to Auto or Manual. MegaPR will now be able to start, stop, or display status for Patrol Read from Windows.
- Typing 'megapr ?' displays help information for the MegaPR utility. The example given for command specific help displays '-ctlrInfo ?', which is not a supported option. Supported options include -dispPR, -startPR, and -stopPR.
- For further information concerning the MegaPR utility or the Patrol Read feature, see the latest PERC User's Guide on http://support.dell.com.
- MegaPR for Windows is only supported on firmware versions listed in the MegaPR Release Notes document or later versions. Do not run MegaPR on controllers with firmware older than the versions listed in the Compatibility/Minimum Requirements section of the MegaPR Release Notes.
- MegaPR will display 'Option not supported for adp 0' for any operations attempted when Patrol Read mode for the controller is set to Disable. The adapter number referenced in the message will correspond to the adapter number specified in the MegaPR command. The Patrol Read mode must be set to Auto or Manual for MegaPR to start or stop a PR iteration. To change the Patrol Read mode on an adapter, enter the PERC BIOS configuration utility by pressing CTRL+M at controller initialization during system POST. Go to Objects, and then select the Adapter menu. If multiple adapters are in the server, select the appropriate adapter. Now choose Patrol Read Options. Change the Patrol Read Mode to Auto or Manual. MegaPR will now be able to start, stop, or display status for Patrol Read from Windows.
- Typing 'megapr ?' displays help information for the MegaPR utility. The example given for command specific help displays '-ctlrInfo ?', which is not a supported option. Supported options include -dispPR, -startPR, and -stopPR.
- For further information concerning the MegaPR utility or the Patrol Read feature, see the latest PERC User's Guide on http://support.dell.com.
適用於
�
PERC 4/DC
PERC 4/SC
PERC3/SC
安裝指示
Custom Instructions for MegaPR_Windows_A02.exe:
Download
--------
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
-------------
1. Browse to the location where the file was downloaded and double-click the file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract the files.
Files included in this release:
-------------------------------
megapr.exe
- MegaPR executable file
MegaPR_Windows_A02.txt
- MegaPR for Windows readme file
Custom Instructions for MegaPR_Windows_A02.txt:
Download the readme file 'MegaPR_Windows_A02.txt' for information concerning this release.
Download
--------
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
-------------
1. Browse to the location where the file was downloaded and double-click the file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract the files.
Files included in this release:
-------------------------------
megapr.exe
- MegaPR executable file
MegaPR_Windows_A02.txt
- MegaPR for Windows readme file
Custom Instructions for MegaPR_Windows_A02.txt:
Download the readme file 'MegaPR_Windows_A02.txt' for information concerning this release.