LSI Logic PERC 3/x, 4/x, 4e/x, CERC ATA 100 Driver
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the LSI Logic PERC 3/SC, 4/DC, 4/SC, 4e/DC, CERC ATA 100 Driver and is supported on the Enterprise Servers and Powervault models that are running the following Windows Operating System: Windows Server 2003.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
- During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
- SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Enhancements
- N/A
閱讀更多- If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
- During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
- SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Enhancements
- N/A
繁體中文版
6.46.2.32, A05
發佈日期
17 1月 2014
下載類型
驅動程式
類別
SCSI RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： RAID_DRVR_WIN_R99970.EXE
檔案大小： 1.13 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
41451665696554870A35CC2BDA98613E
SHA1：
不適用
SHA-256：
不適用
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： perc-cerc-w2k3-6.46.2.32-A05.exe
檔案大小： 75 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
檔案格式： 外部版本資訊
檔案名稱： perc-cerc-w2k3-6.46.2.32-A05.txt
檔案大小： 28.32 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
-
適用於
�
CERC ATA 100
PERC 4/DC
PERC 4/SC
PERC3/SC
安裝指示
Install Instructions
=======
This is a self-extracting package of the Windows 2000 and 2003 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC,CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.To build the installation diskette, execute the package, directing its output to an empty, formatted diskette.
Installing the Driver during Operating System Installation
---------
1. Boot the system using the Microsoft Windows Server CD.
2. When the message Press F6 if you need to install a third party SCSI or RAID driver appears, press the key immediately. Within a few minutes, a screen appears that asks for additional controllers in the system.
3. Press the key. The system prompts for the driver diskette to be inserted.
4. Insert the driver diskette in the floppy drive and press the key. A list of PERC controllers appears.
5. Select the right driver for the installed controller and press the key to load the driver.
NOTE: For Windows 2003, a message appears that states that the driver that you provided is older/newer then the Windows driver. Press the key to use the driver that is on the floppy diskette.
6. Press the key again to continue the installation process as usual.
Installing a Windows Driver for a New RAID Controller
-----------
Perform the following steps to configure the driver when you add the RAID controller to a system that already has Windows installed.
1. Power down the system.
2. Install the new RAID controller in the system. Refer to Hardware Installation for detailed instructions on installing and cabling the RAID controller in the system.
3. Power on the system. The Windows operating system should detect the new controller and display a message to inform the user.
4. The Found New Hardware Wizard screen pops up and displays the detected hardware device.
5. Click Next.
6. On the Locate device driver screen, select Search for a suitable driver for my device and click Next.
7. Insert the appropriate driver diskette and select Floppy disk drives on the Locate Driver Files screen.
8. Click Next.
9. The wizard detects and installs the appropriate device drivers for the new RAID controller.
10. Click Finish to complete the installation.
11. Reboot the server.
=======
This is a self-extracting package of the Windows 2000 and 2003 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC,CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.To build the installation diskette, execute the package, directing its output to an empty, formatted diskette.
Installing the Driver during Operating System Installation
---------
1. Boot the system using the Microsoft Windows Server CD.
2. When the message Press F6 if you need to install a third party SCSI or RAID driver appears, press the
3. Press the
4. Insert the driver diskette in the floppy drive and press the
5. Select the right driver for the installed controller and press the
NOTE: For Windows 2003, a message appears that states that the driver that you provided is older/newer then the Windows driver. Press the
6. Press the
Installing a Windows Driver for a New RAID Controller
-----------
Perform the following steps to configure the driver when you add the RAID controller to a system that already has Windows installed.
1. Power down the system.
2. Install the new RAID controller in the system. Refer to Hardware Installation for detailed instructions on installing and cabling the RAID controller in the system.
3. Power on the system. The Windows operating system should detect the new controller and display a message to inform the user.
4. The Found New Hardware Wizard screen pops up and displays the detected hardware device.
5. Click Next.
6. On the Locate device driver screen, select Search for a suitable driver for my device and click Next.
7. Insert the appropriate driver diskette and select Floppy disk drives on the Locate Driver Files screen.
8. Click Next.
9. The wizard detects and installs the appropriate device drivers for the new RAID controller.
10. Click Finish to complete the installation.
11. Reboot the server.