Seagate SAS ST9146802SS and ST973402SS firmware version S22F.
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This release contains firmware version S22F for Seagate 10K SAS 2.5 73GB and 146GB Hard Drives. Dell Part numbers CM318 and HT952, drive models ST9146802SS and ST973402SS. .
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Enhancements to error detection algorithm
Improved error reporting
Improved Sequential Streaming performance
Improved Mode Page logging
Improved handling of Dual port reset
Enabled skip sequential read streaming feature to improve Raid-5 read performance.
閱讀更多Improved error reporting
Improved Sequential Streaming performance
Improved Mode Page logging
Improved handling of Dual port reset
Enabled skip sequential read streaming feature to improve Raid-5 read performance.
繁體中文版
S22F, A02
發佈日期
05 7月 2012
下載類型
韌體
類別
SAS 硬碟
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： SAS-Drive_Firmware_9KJ12_WN32_S22F_A02.EXE
檔案大小： 11.08 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
6a8af3cf46705a37598dae4235efccf2
SHA1：
ea0656fac0080a066574d4898ae28298290efb62
SHA-256：
ba97d00cc9b52e5952335bf7e0eec1f2d1e34bb671b2c86ca7d5607d3c856d9c
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： SAS-Drive_Firmware_9KJ12_LN32_S22F_A02.BIN.sign
檔案大小： 189 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
a573598cf9cffb766b0ee50cdc92873f
SHA1：
dac08774c79e082ca8e3f453781ddb0ef1e6b7d1
SHA-256：
23dc5462576adf303122ab0a0a7ffbe52efb0dcbf2b0e87a0e16ceba9bb49d8f
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： SAS-Drive_Firmware_9KJ12_LN32_S22F_A02.BIN
檔案大小： 9.82 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
66c88865d12bb3192838e2caffcd99bb
SHA1：
c73fcc137d9b761f321a35c4bb6b3535a7ece2b6
SHA-256：
86a409e83a202feadfa3983e88047e317801c5bec44bb2ce5b1fd8e2a9c49d9a
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
支援的作業系統
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.7
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
適用於
HD,146G,SAS,3,10K,2.5,SGT2,DU
HD,73G,SAS,3,10K,2.5,SGT2,DU
安裝指示
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.