DX Monitor Nagios 1.0.0
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Dell DX6000, DX Monitoring Nagios, 1.0.0
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
DX Cluster Monitoring using open source Nagios.
閱讀更多繁體中文版
1.0.0, 1.0.0
發佈日期
20 7月 2012
下載類型
公用程式
類別
系統公用程式
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 影像的基礎驅動程式
檔案名稱: DXMonitorNagios1.0.0.zip
檔案大小: 12.06 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
為了確保下載的完整性,請驗證總和檢查值。
MD5:
f0670df00c60008275635737d929a46d
SHA1:
4768bed90c80b2b2773bc3b774db28b26ceff9ac
SHA-256:
a46f5eaa7125e494b6a0f4b18391e53a879da34bef5b3212e0349b28d947fe1f
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
This package installs and enables DX monitoring via Nagios.
不適用
DX Monitoring via Nagios Version 1.0
DX Monitoring via Nagios Plugin install instructions. (Version 1.0.0)
Disclaimer:
The DXMonitorNagios bundle contains nagios open source packages in RHEL5 directory. The corresponding source rpms are in the SOURCES directory. Both the rpms and sources were obtained from the following locations:
http://apt.sw.be/redhat/el5/en/source/
http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/
NOTE: DXMonitorNagios1.0.0 is supported on RHEL5.5 for the CSN2.1.1 bundle *only*.
Installation instructions:
1. Download the latest version of DXMonitorNagios package from http://support.dell.com under the DX6000 product.
2. Copy the zip file to /opt/dell directory on your CSN.
3. unzip DX Monitor Nagios zip.
# cd /opt/dell
# unzip DXMonitorNagios1.0.0.zip
4. change the directory to DXMonitorNagios
# cd DXMonitorNagios1.0.0
5. Run the DX Monitor Nagios installer
# ./DXMonitor-Nagios-install.sh
5.1 Provide your email address to receive DX monitoring notification emails.
5.2 Provide your SMTP email server address or DNS name.
5.3 The installer will install and configure DX Monitoring service using Nagios.
5.4 Once configuration is complete it will send you a test email to the email address you provided. Once you receive the email, enter 'yes' to confirm correct installation and configuration and to exit the installer program.
CONFIGURATION
NOTE: DO NOT change the preconfigured Nagios configuration files.
The DX Monitor preconfigures the Nagios web console to run on HTTP port 9090, with a default username and password of nagiosadmin and dell, respectively.
1. Enter http://localhost:9090/nagios in your web browser to login to the Nagios web console.
2. Click the Current Status -> Services tab in the Nagios web console to list and monitor all preconfigured DX Services.
3. For information on Nagios usage, click the General -> Documentation tab.
4. The installer has preconfigured all of the settings required for DX Cluster monitoring and notification. The Nagios configuration files are installed in the /etc/nagios directory.
Using DX Monitoring via Nagios:
1. Login in Nagios web console using "http://localhost:9090/nagios" address with username "nagiosadmin" and default password "dell".
2. Click "Current Status -> Services" in Nagios web console to list and monitor all DX services. DXMonitorNagios will pre configure Nagios services to monitor your DX cluster including CSN services.
3. Check DX Monitor Nagios Admin Guide for more information.
NOTE: Do NOT change the Nagios configuration files preconfigured to manage your DX cluster.
Uninstall instructions:
1. Run the DX Monitoring uninstaller to remove all packages and configuration files from the CSN.
# cd /opt/dell/DXMonitorNagios1.0.0
# ./DXMonitor-Nagios-remove.sh
Disclaimer:
The DXMonitorNagios bundle contains nagios open source packages in RHEL5 directory. The corresponding source rpms are in the SOURCES directory. Both the rpms and sources were obtained from the following locations:
http://apt.sw.be/redhat/el5/en/source/
http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/
NOTE: DXMonitorNagios1.0.0 is supported on RHEL5.5 for the CSN2.1.1 bundle *only*.
Installation instructions:
1. Download the latest version of DXMonitorNagios package from http://support.dell.com under the DX6000 product.
2. Copy the zip file to /opt/dell directory on your CSN.
3. unzip DX Monitor Nagios zip.
# cd /opt/dell
# unzip DXMonitorNagios1.0.0.zip
4. change the directory to DXMonitorNagios
# cd DXMonitorNagios1.0.0
5. Run the DX Monitor Nagios installer
# ./DXMonitor-Nagios-install.sh
5.1 Provide your email address to receive DX monitoring notification emails.
5.2 Provide your SMTP email server address or DNS name.
5.3 The installer will install and configure DX Monitoring service using Nagios.
5.4 Once configuration is complete it will send you a test email to the email address you provided. Once you receive the email, enter 'yes' to confirm correct installation and configuration and to exit the installer program.
CONFIGURATION
NOTE: DO NOT change the preconfigured Nagios configuration files.
The DX Monitor preconfigures the Nagios web console to run on HTTP port 9090, with a default username and password of nagiosadmin and dell, respectively.
1. Enter http://localhost:9090/nagios in your web browser to login to the Nagios web console.
2. Click the Current Status -> Services tab in the Nagios web console to list and monitor all preconfigured DX Services.
3. For information on Nagios usage, click the General -> Documentation tab.
4. The installer has preconfigured all of the settings required for DX Cluster monitoring and notification. The Nagios configuration files are installed in the /etc/nagios directory.
Using DX Monitoring via Nagios:
1. Login in Nagios web console using "http://localhost:9090/nagios" address with username "nagiosadmin" and default password "dell".
2. Click "Current Status -> Services" in Nagios web console to list and monitor all DX services. DXMonitorNagios will pre configure Nagios services to monitor your DX cluster including CSN services.
3. Check DX Monitor Nagios Admin Guide for more information.
NOTE: Do NOT change the Nagios configuration files preconfigured to manage your DX cluster.
Uninstall instructions:
1. Run the DX Monitoring uninstaller to remove all packages and configuration files from the CSN.
# cd /opt/dell/DXMonitorNagios1.0.0
# ./DXMonitor-Nagios-remove.sh