Adaptec CERC SATA1.5/6ch, v.4.1.0.7419, A17
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
CERC SATA 1.5/6ch RAID Controller Firmware version 4.1.0.7419.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Release Highlights - Fixes:
The following defects have been fixed.
- Corrects issue seen where hard drives were being taken offline while using certain utility Softwares to create snapshots of the partition images.
- Corrects issues seen with Maxtor SABRE hard drives during POST where intermittent "SMART N/A" messages were reported by the controller on multiple reboots.
- Corrects intermittent issues where controller lockups are seen with some hard drive''s Smart errors during POST.
- Corrects contradictory multiple BBR messaging in Array Manager/OMSS logs when bad blocks are encountered on hard drives.
閱讀更多The following defects have been fixed.
- Corrects issue seen where hard drives were being taken offline while using certain utility Softwares to create snapshots of the partition images.
- Corrects issues seen with Maxtor SABRE hard drives during POST where intermittent "SMART N/A" messages were reported by the controller on multiple reboots.
- Corrects intermittent issues where controller lockups are seen with some hard drive''s Smart errors during POST.
- Corrects contradictory multiple BBR messaging in Array Manager/OMSS logs when bad blocks are encountered on hard drives.
繁體中文版
4.1.0.7419, A17
發佈日期
17 7月 2007
下載類型
韌體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： FRMW_WIN_R155588.EXE
檔案大小： 3.01 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
B1D285026FE5CBA45B7A41D90E77B6F6
SHA1：
不適用
SHA-256：
不適用
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： BR155588.exe
檔案大小： 1.25 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
2c352edb01dad60d870a8d023d3f523a
SHA1：
不適用
SHA-256：
不適用
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： FRMW_LX_R155588.BIN.sign
檔案大小： 194 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
DE0AACC57951F51B8C97730CB291C032
SHA1：
不適用
SHA-256：
不適用
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： FRMW_LX_R155588.BIN
檔案大小： 5.43 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
B3C751EBC78588FAC0C5CD0B8EDE090A
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
NOTE: The Linux DUP (Dell Update Package) package on this release may not work on RHEL5. It does work on earlier versions of RHEL. In cases where it does not work, the web pack will have to be used to perform this update.
適用於
CERC SATA1.5/6ch
INFO,PWS470,C3,SATA,R0,3 HDD
INFO,PWS670,C3,BOOTNO,S,R03HD
INFO,PWS670,C3A,BOOTNO,S,R04HD
安裝指示
Custom Instructions for BR155588.exe:
Floppy Disk Boot to Disk for cerc7417_a15.exe
Download
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black DR-DOS window appears with a message
indicating that you need 2 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette. Insert
a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 4 – 6 until you reach the end of the
diskette set.
7. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the DR-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Firmware Installation
==============================================
Performing the CERC SATA 6ch Firmware Upgrade in Interactive Mode
----------------------------------------------------------
The AFU includes an interactive mode.
To update the firmware using the AFU interactive mode,
follow these steps:
1. Shut down your system.
2. Reboot the system with the diskette labeled:
Dell CERC SATA 6ch Firmware
Disk 1 of 2
3. At the DOS prompt, enter the following command and
press [ENTER]:
afu
This starts the AFU in interactive mode. The AFU will detect the installed CERC SATA 6ch controllers.
4. A menu will be presented. Select the following
option:
Update flash image
6. The AFU will issue the following message:
Update from the flash image in directory:
A:\
Change the directory if necessary, then use the TAB
key to select the OK box, and press [ENTER].
7. AFU will issue this message:
Reading flash image file...
Please insert disk labeled "Dell CERC SATA 6ch Firmware disk 2".
8. Insert the second diskette and press [ENTER].
9. AFU will complete reading the flash image, then AFU
will issue this message:
AFU is about to update firmware on controllers Dell CERC SATA 6ch
10. Select the OK box, then press [ENTER]. AFU will proceed
to update the firmware. You will see the following
message:
Writing CERC SATA 6ch Flash image to controller 0 ...
This message will be followed by additional progress
messages. When the flash update has completed, you
will see this message:
Flash image was updated and verified successfully.
11. Press any key, then press the ESC key to exit AFU.
12. Remove any diskettes from the drive and reboot the
system.
Instructions for FRMW_LX_R155588.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./FRMW_LX_R155588.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing .
Floppy Disk Boot to Disk for cerc7417_a15.exe
Download
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black DR-DOS window appears with a message
indicating that you need 2 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette. Insert
a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 4 – 6 until you reach the end of the
diskette set.
7. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the DR-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Firmware Installation
==============================================
Performing the CERC SATA 6ch Firmware Upgrade in Interactive Mode
----------------------------------------------------------
The AFU includes an interactive mode.
To update the firmware using the AFU interactive mode,
follow these steps:
1. Shut down your system.
2. Reboot the system with the diskette labeled:
Dell CERC SATA 6ch Firmware
Disk 1 of 2
3. At the DOS prompt, enter the following command and
press [ENTER]:
afu
This starts the AFU in interactive mode. The AFU will detect the installed CERC SATA 6ch controllers.
4. A menu will be presented. Select the following
option:
Update flash image
6. The AFU will issue the following message:
Update from the flash image in directory:
A:\
Change the directory if necessary, then use the TAB
key to select the OK box, and press [ENTER].
7. AFU will issue this message:
Reading flash image file...
Please insert disk labeled "Dell CERC SATA 6ch Firmware disk 2".
8. Insert the second diskette and press [ENTER].
9. AFU will complete reading the flash image, then AFU
will issue this message:
AFU is about to update firmware on controllers Dell CERC SATA 6ch
10. Select the OK box, then press [ENTER]. AFU will proceed
to update the firmware. You will see the following
message:
Writing CERC SATA 6ch Flash image to controller 0 ...
This message will be followed by additional progress
messages. When the flash update has completed, you
will see this message:
Flash image was updated and verified successfully.
11. Press any key, then press the ESC key to exit AFU.
12. Remove any diskettes from the drive and reboot the
system.
Instructions for FRMW_LX_R155588.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./FRMW_LX_R155588.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing .