Dell BMC Firmware Update
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the driver for Dell BMC Firmware Update and is supported on Enterprise Servers and Powervault models that are running the following Operating System: NA.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
-Fixed DRAC5 POST log issue.
Enhancements
- N/A
閱讀更多-Fixed DRAC5 POST log issue.
Enhancements
- N/A
繁體中文版
2.37, A12
發佈日期
23 12月 2013
下載類型
韌體
類別
內嵌式伺服器管理
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： BMC_FRMW_WIN_R202148.EXE
檔案大小： 4.57 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
0E2B2A81354D627E75B3D8AA22AAED38
SHA1：
不適用
SHA-256：
不適用
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： BMC_FRMW_LX_R202148.BIN.sign
檔案大小： 194 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
D9623C16AA2C7959C89BC3A5F318AF5A
SHA1：
不適用
SHA-256：
不適用
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： PE2900Bmc_A12.exe
檔案大小： 329.5 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存，且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
61ac6468e006edae0a54205dafca1179
SHA1：
不適用
SHA-256：
不適用
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： BMC_FRMW_LX_R202148.BIN
檔案大小： 3.7 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
6ECCFDAA750CC95135B05734B5DAC508
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Important Information for Update Packages for Microsoft Windows
1. Do not run other applications while executing Dell Update Packages.
2. When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
1. Do not run other applications while executing Dell Update Packages.
2. When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
適用於
BMC Firmware
安裝指示
Dell Update Package Instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.