Dell SAS Hard Drive Firmware Utility, SATA Hard Drive Firmware Utility, v.Seagate SAS, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Seagate drives not seen during SMTD installation or after adding additional drives online
in Linux. This is a special release targeted only for 5 Seagate SAS drives listed in the Fixes and Enhancements section.
R211868 is intended for all other firmware updates.
in Linux. This is a special release targeted only for 5 Seagate SAS drives listed in the Fixes and Enhancements section.
R211868 is intended for all other firmware updates.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Several Seagate drives shipped from Dell factories between February 2nd and February 20th may experience the following symptoms:
A) During an install from System Management Tool and Documentation DVD:
1. If there is no RAID config from ctrl-r and the DVD is booted it will display a blank white screen where there should be array configuration setup.
2. If there is a RAID config from ctrl-r already present on the drives, it will boot to the SMTD DVD but skip the RAID config screen. The menu item for RAID config in the left window will not appear in the action list. Install can be completed using this method.
B) Enclosure or server hard drives are being configured or added in an existing Linux install:
The drives my not be seen in the Linux browser that is using Open Manage Storage Management to configure the drives. Or, the Vendor ID for the disk drive may appear with garbled characters.
The FW version on the drive label will represent the correct firmware version; however, a later version was flashed to the drive in the factory.
Affected drives:
Family Part # Right FW Wrong FW
Maverick XT764 SM04 SM07
Maverick RN829 SM04 SM07
Firebird HT952 S229 S22B
Firebird CM318 S229 S22B
Timberland T-10 GY582 T211 T213
Timberland T-10 HT954 T211 T213
Timberland T-10 HT938 T211 T213
Timberland NS GY583 NS25 NS27
Timberland 15K5 GY581 S528 S529
Timberland 15K5 HT953 S528 S529
Timberland 15K5 TN937 S528 S529
閱讀更多A) During an install from System Management Tool and Documentation DVD:
1. If there is no RAID config from ctrl-r and the DVD is booted it will display a blank white screen where there should be array configuration setup.
2. If there is a RAID config from ctrl-r already present on the drives, it will boot to the SMTD DVD but skip the RAID config screen. The menu item for RAID config in the left window will not appear in the action list. Install can be completed using this method.
B) Enclosure or server hard drives are being configured or added in an existing Linux install:
The drives my not be seen in the Linux browser that is using Open Manage Storage Management to configure the drives. Or, the Vendor ID for the disk drive may appear with garbled characters.
The FW version on the drive label will represent the correct firmware version; however, a later version was flashed to the drive in the factory.
Affected drives:
Family Part # Right FW Wrong FW
Maverick XT764 SM04 SM07
Maverick RN829 SM04 SM07
Firebird HT952 S229 S22B
Firebird CM318 S229 S22B
Timberland T-10 GY582 T211 T213
Timberland T-10 HT954 T211 T213
Timberland T-10 HT938 T211 T213
Timberland NS GY583 NS25 NS27
Timberland 15K5 GY581 S528 S529
Timberland 15K5 HT953 S528 S529
Timberland 15K5 TN937 S528 S529
繁體中文版
Seagate SAS, A00
發佈日期
23 8月 2012
下載類型
韌體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： DELL_MULTI-DEVICE_A00_R212231.exe
檔案大小： 5.15 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
07a889d1d650e647303195565a48482d
SHA1：
f396db7f37687f51554f9eb462731444fac94725
SHA-256：
50ba59ffee6da32cccca3a521962146e1ec89ba8465b000d78b751c07af10fb7
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
This release is intended for use on drives attached to SAS/ PERC controllers and MD1000 Enclosures.
Please note: Only Dell Branded SAS/SCSI and PERC controllers are supported. Embedded SATA controllers are not supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
Please note: Only Dell Branded SAS/SCSI and PERC controllers are supported. Embedded SATA controllers are not supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
適用於
Dell SAS/SATA Hard Drive
安裝指示
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.