請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。
更新前，請閱讀以下所述的安裝說明與重要資訊。
XPS ONE 2710 System BIOS
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
XPS ONE 2710 A08 BIOS for Windows 7 and Windows 8
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Update Intel VBIOS and GOP driver
閱讀更多繁體中文版
A08, A08
發佈日期
05 11月 2012
下載類型
系統 BIOS
類別
BIOS
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 快閃 BIOS 執行檔
檔案名稱： A08.EXE
檔案大小： 12.37 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式包含 BIOS 可執行檔。若要更新您的系統，請下載該檔案並將其儲存至您的桌面或硬碟，然後執行可執行檔。若要更新 BIOS，您的系統必須接上交流電源，而且電池電量至少需達 10% 以上。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
cbc7d40a7ff0ddeef726ff97e263db3b
SHA1：
11582135cefc929b09bcb5c104e1872bc40a1e06
SHA-256：
45d3ef5b6b6452c9455d71f2c9ea7b4fea258ad38feeab387ff28ed3b020f39b
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Please run A08.exe directly if you already updated the BIOS to A06.
Attention! Once you upgraded the BIOS to A08. Please DO NOT downgrade the BIOS to any older version.
Note! The SATA mode will be changed to AHCI after you flash the BIOS.
Please check the SATA mode in BIOS setup menu before BIOS update. It must be changed back to correct SATA mode for your system. Such as the system has RAID support by default, the SATA mode must be changed to RAID after BIOS update if it is not set to RAID correctly. You would refer to the following steps to change the SATA mode setting.
1. Power on the system -> 2. Press F2 to enter BIOS setup menu --> 3. Go to the "Advanced" page --> 4. Choose "Onboard Device Configuration"--> 5. Enter "SATA Mode" to change the mode which you need --> 6. Press F10 Save and Reset
Attention! Once you upgraded the BIOS to A08. Please DO NOT downgrade the BIOS to any older version.
Note! The SATA mode will be changed to AHCI after you flash the BIOS.
Please check the SATA mode in BIOS setup menu before BIOS update. It must be changed back to correct SATA mode for your system. Such as the system has RAID support by default, the SATA mode must be changed to RAID after BIOS update if it is not set to RAID correctly. You would refer to the following steps to change the SATA mode setting.
1. Power on the system -> 2. Press F2 to enter BIOS setup menu --> 3. Go to the "Advanced" page --> 4. Choose "Onboard Device Configuration"--> 5. Enter "SATA Mode" to change the mode which you need --> 6. Press F10 Save and Reset
支援的作業系統
BIOS
適用於
Dell XPS One 2710
安裝指示
1. Boot into Windows.
2. Copy A08.EXE onto your desktop.
3. Execute A08.EXE by double click it.
4. Click Update when BIOS Update Program dialogue box pop up.
5. Make sure you don't interrupt the update process.
6. Do not turn off power or disconnect AC power source before update complete.
7. Press Yes to confirm the BIOS version you want to update and to start BIOS Update process.
8. Press Yes and then system will restart after BIOS update complete.
2. Copy A08.EXE onto your desktop.
3. Execute A08.EXE by double click it.
4. Click Update when BIOS Update Program dialogue box pop up.
5. Make sure you don't interrupt the update process.
6. Do not turn off power or disconnect AC power source before update complete.
7. Press Yes to confirm the BIOS version you want to update and to start BIOS Update process.
8. Press Yes and then system will restart after BIOS update complete.