LSI Logic PERC 4/DC, v.351S, A05
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Dell PowerEdge RAID Controller 4/DC firmware and update script for for IA-64 based platforms. The update script runs under EFI.
Version: 351S
Version: 351S
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Current Firmware - 351S
(Previous - 350O)
Current BIOS - 1.10
(Previous - 1.09)
Current Ctrl-M - U827
(Previous - U821)
Current Boot Block - 1.7.7Dell
(Previous - 1.7.6Dell)
Fixes
1. Fixed an issue that optimized cache flush algorithms while switching between no read-ahead to read-ahead cache modes.
2. Modified the Fast Initialization function to delete all operation system partition table information.
3. Fixed an issue where a Seagate hard drive model M3637 was not negotiating correctly with PERC 4 adapters.
4. Fixed a SES Timeout error caused by a media error recovery defect in cluster mode on a PERC4/DC and a PERC3/DC.
5. Modified Ctrl-M to clear physical drive media error count upon drive replacement.
Note: System must be powered on during the drive replacement in order for media errors to be cleared.
6. Modified caching algorithms to not switch from Write-back to Write-through during a battery fast charge.
7. Fixed a performance degradation issue when using RAID 10 virtual disks, when configured to use no read ahead or write caching and direct IO on PERC4 controllers.
Enhancements
1. Added Patrol Read feature. Patrol Read involves the review of the system for possible hard drive errors that could lead to drive failure, then action to correct the errors. The goal is to protect data integrity by detecting physical drive failures before the failures can damage data. Patrol Read adjusts the amount of RAID controller resources dedicated to Patrol Read operations based on outstanding disk I/O.
2. Added Rebuild Checkpoint feature. The Dell PERC firmware has a feature to resume a rebuild on a physical drive in case of an abrupt power loss or if the server rebooted in the middle of a rebuild operation.
3. Enhanced write algorithms to increase I/O performance for RAID 5 and RAID 50 virtual disks using four or more disks that are configured to use write-through write cache mode.
Firmware upgrade while controller is doing background I/O task:
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task. (ie. check consistency, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. Current RAID configuration will not be modified or cleared during the Firmware Upgrade process.
閱讀更多(Previous - 350O)
Current BIOS - 1.10
(Previous - 1.09)
Current Ctrl-M - U827
(Previous - U821)
Current Boot Block - 1.7.7Dell
(Previous - 1.7.6Dell)
Fixes
1. Fixed an issue that optimized cache flush algorithms while switching between no read-ahead to read-ahead cache modes.
2. Modified the Fast Initialization function to delete all operation system partition table information.
3. Fixed an issue where a Seagate hard drive model M3637 was not negotiating correctly with PERC 4 adapters.
4. Fixed a SES Timeout error caused by a media error recovery defect in cluster mode on a PERC4/DC and a PERC3/DC.
5. Modified Ctrl-M to clear physical drive media error count upon drive replacement.
Note: System must be powered on during the drive replacement in order for media errors to be cleared.
6. Modified caching algorithms to not switch from Write-back to Write-through during a battery fast charge.
7. Fixed a performance degradation issue when using RAID 10 virtual disks, when configured to use no read ahead or write caching and direct IO on PERC4 controllers.
Enhancements
1. Added Patrol Read feature. Patrol Read involves the review of the system for possible hard drive errors that could lead to drive failure, then action to correct the errors. The goal is to protect data integrity by detecting physical drive failures before the failures can damage data. Patrol Read adjusts the amount of RAID controller resources dedicated to Patrol Read operations based on outstanding disk I/O.
2. Added Rebuild Checkpoint feature. The Dell PERC firmware has a feature to resume a rebuild on a physical drive in case of an abrupt power loss or if the server rebooted in the middle of a rebuild operation.
3. Enhanced write algorithms to increase I/O performance for RAID 5 and RAID 50 virtual disks using four or more disks that are configured to use write-through write cache mode.
Firmware upgrade while controller is doing background I/O task:
The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task. (ie. check consistency, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. Current RAID configuration will not be modified or cleared during the Firmware Upgrade process.
繁體中文版
351S, A05
發佈日期
07 6月 2005
下載類型
韌體
類別
SCSI RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： ZipPack 外接
檔案名稱： R101840.EXE
檔案大小： 985.68 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
檔案格式： 外部版本資訊
檔案名稱： perc4dc-IA64-351S-A05.txt
檔案大小： 5.69 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Red Hat® Enterprise Linux 3
Red Hat® Enterprise Linux 4
Windows Server 2003
適用於
PERC 4/DC
安裝指示
Instructions for R101840.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
To update the firmware for your PERC 4/DC adapter, perform the following steps:
1. Extract the contents of the firmware package to your hardrive.
2. Copy the contents of the package to a formatted floppy disk, USB key, or CD-ROM.
3. Power on the server. From the EFI Boot Manager Menu, select EFI Shell.
4. Insert the media which contains the firmware update files from step 2.
This may be a USB key, floppy diskette (a USB floppy drive may be used), or CD-ROM.
5. At the Shell> prompt, type 'map -r' to view all mounted devices. Locate the device which contains the firmware update files - it will be enumerated as fs0, fs1, ect.
6. To change to the proper device, type 'fs1:'
NOTE: Your device may have a different file system number.
7. From the fs1:> prompt type 'percupd.nsh' to initiate the firmware update.
8. Follow the instructions from the EFI update tool to complete the firmware upgrade.
9. You will need to restart your system for the new firmware to take effect.
Custom Instructions for perc4dc-IA64-351S-A05.txt:
Download the readme file to view information about this release.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
To update the firmware for your PERC 4/DC adapter, perform the following steps:
1. Extract the contents of the firmware package to your hardrive.
2. Copy the contents of the package to a formatted floppy disk, USB key, or CD-ROM.
3. Power on the server. From the EFI Boot Manager Menu, select EFI Shell.
4. Insert the media which contains the firmware update files from step 2.
This may be a USB key, floppy diskette (a USB floppy drive may be used), or CD-ROM.
5. At the Shell> prompt, type 'map -r' to view all mounted devices. Locate the device which contains the firmware update files - it will be enumerated as fs0, fs1, ect.
6. To change to the proper device, type 'fs1:'
NOTE: Your device may have a different file system number.
7. From the fs1:> prompt type 'percupd.nsh' to initiate the firmware update.
8. Follow the instructions from the EFI update tool to complete the firmware upgrade.
9. You will need to restart your system for the new firmware to take effect.
Custom Instructions for perc4dc-IA64-351S-A05.txt:
Download the readme file to view information about this release.