Dell PowerVault 35F, D9908E

已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。
此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
PowerVault 35F firmware version d9908e.
建議

為您的系統尋找最適合的下載項目

請輸入產品的詳細資料以檢視系統的最新驅動程式資訊

搜尋支援

輸入您的 Dell 產品服務編號或型號

想要尋找您的產品嗎?請輸入產品識別碼。 告訴我怎麼做

此驅動程式不相容

此驅動程式不適用於選取的產品。請選擇其他產品,以重新輸入適用於此驅動程式的產品詳細資料,或前往產品支援頁面,檢視其他產品的所有驅動程式。

尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。

繁體中文版

d9908e, D9908E

發佈日期

06 2月 2001

下載類型

韌體

類別

光纖通道

重要性

選用
Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
可用的格式

檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: D9908E.exe
檔案大小: 553 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
af7f581a2ef46319201864a1164038a7
SHA1:
不適用
SHA-256:
不適用

當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。

其他詳細資料

顯示全部 | 隱藏全部
PowerVault 35F Firmware Download Instructions

The PowerVault 35F can either use FTP, TFTP or a serial connection
(using the XMODEM protocol) to update the firmware. In order to
update the firmware via the serial connection, the PowerVault 35F
must be connected to a terminal emulation program supporting
XMODEM transfers. This menu item does not appear when accessing
the configuration menus through Telnet.

To download firmware using FTP:

1. Connect your computer to the PowerVault 35F’ s Ethernet port.

2. Start your FTP program using the PowerVault 35F’ s IP address:

ftp

Note: The default IP address is 1.1.1.1. See the Change IP
Address section of this chapter for information on changing
the PowerVault 35F IP address.

3. Use root as the user name and password as the password.
To change the user name and password, see the Change Security
Settings section of this chapter.

4. Specify binary mode:

bin

5. Specify the firmware’s path and filename with the put command:
put

The file will transfer and the PowerVault 35F will reboot. The
PowerVault 35F is now using the new firmware.

NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’s reboot messages through the
serial interface.

To download firmware using TFTP:

1. Connect your computer using the PowerVault 35F’s
Ethernet port.

2. At the command line, type the following command:

tftp -i put

The file will tranfer and the PowerVault 35F will
reboot. The PowerVault 35F is now using the new
firmware.

NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’ s reboot messages through
the serial interface.

To download firmware using a terminal emulator:

NOTE: For quicker downloading, configure the PowerVault 35F
and the terminal emulator utility session connected to it
(such as Hyperterminal) to run at 115200.

1. Establish a Serial Connection to the PowerVault 35F.

2. From the Advanced Options menu, select the Download a
new revision of the Firmware command to start the download
procedure.

3. When you confirm you want to download, the PowerVault 35F
will start the download process.

4. Use the Transfer® Send File option in the terminal emulator
utility.

5. Select the location of the firmware. Use the Browse button,
if you need help finding it.

6. Make sure you select XMODEM as the protocol.

7. Press the Send button.

8. The firmware will begin to download.

When the download is complete, the system verifies that the
firmware image was successfully written to the FLASH memory and
then reboots the PowerVault 35F. Upon reboot, the PowerVault 35F
detects that there is a newly downloaded firmware image and
copies that image to the boot sector of the FLASH and then boots
with that image. At that point the PowerVault 35F is using the
new firmware image.

驅動程式說明與教學課程