Dell IEEE 1394 Firmware , A01
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
The A01 version of IEEE 1394 Firmware Update contains the support necessary to create a IEEE 1394 bootable CD for use on systems which support IEEE 1394 CD drives as bootable devices.
** 1394_A01.iso creates a bootable CD disk updating the IEEE 1394 Firmware. THIS IMAGE IS TO FLASH THE IEEE 1394 FIMWARE OF THE DELL X200
ONLY**
The ISO image file uses Windows 98 DOS and IEEE 1394 CD drivers.
** 1394_A01.iso creates a bootable CD disk updating the IEEE 1394 Firmware. THIS IMAGE IS TO FLASH THE IEEE 1394 FIMWARE OF THE DELL X200
ONLY**
The ISO image file uses Windows 98 DOS and IEEE 1394 CD drivers.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
- This release allows the IEEE1394 Firmware update to be run on a system without a Floppy Drive attached.
閱讀更多繁體中文版
A01, A01
發佈日期
21 10月 2002
下載類型
公用程式
類別
系統公用程式
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式
檔案格式： ZipPack 外接
檔案名稱： 1394_A01.EXE
檔案大小： 743.27 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
BIOS
安裝指示
Please follow these instructions:
**Note: You will require a CDRW and a CD burning software such as Roxio
Easy CD Creator 5 in order to use this file to create a Bootable CD to
update the IEEE 1394 Firmware.**
1. Download the file to your hard drive.
2. Place a blank CD-ROM in your CDRW.
3. Double-Click on the "1394_A01.iso" file.
4. The file should automatically launch the CD burning software.
5. Select th option to "Start Recording".
6. The CD burning software will create a bootable CD with the 1394
Firware Update.
7. Click OK to exit the application.
8. Close all applications on you desktop and restart your system while
the Boot CD is present in the CD-ROM Drive.
9. You computer will boot to the CD and ask to,"Press any key to
continue..." to update the Firmware.
10. Press Enter. The Firware will be updated at this time.
11. Remove CD-ROM and reboot you computer.
**Note: You will require a CDRW and a CD burning software such as Roxio
Easy CD Creator 5 in order to use this file to create a Bootable CD to
update the IEEE 1394 Firmware.**
1. Download the file to your hard drive.
2. Place a blank CD-ROM in your CDRW.
3. Double-Click on the "1394_A01.iso" file.
4. The file should automatically launch the CD burning software.
5. Select th option to "Start Recording".
6. The CD burning software will create a bootable CD with the 1394
Firware Update.
7. Click OK to exit the application.
8. Close all applications on you desktop and restart your system while
the Boot CD is present in the CD-ROM Drive.
9. You computer will boot to the CD and ask to,"Press any key to
continue..." to update the Firmware.
10. Press Enter. The Firware will be updated at this time.
11. Remove CD-ROM and reboot you computer.