Dell Backplane Firmware, A02
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
The Backplane (BP) Embedded Server Management (ESM) flash utility is a
tool to update firmware(FW) to the Backplane.
tool to update firmware(FW) to the Backplane.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
- Prevent occasionally backplane not responding to I2C commands if the
backplane was reset (SCSI reset) during an I2C transmission.
- Enable BP GEM controller to reset on SCSI reset.
- Prevent LM75 lockup if communication should fail.
閱讀更多backplane was reset (SCSI reset) during an I2C transmission.
- Enable BP GEM controller to reset on SCSI reset.
- Prevent LM75 lockup if communication should fail.
繁體中文版
A02, A02
發佈日期
31 12月 2002
下載類型
韌體
類別
內嵌式伺服器管理
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： PV775N-ESM-WIN-A02.exe
檔案大小： 1.78 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
6D750201C90F9D7AC90F9B499BD5A06F
SHA1：
不適用
SHA-256：
不適用
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： PV775N-ESMA02.exe
檔案大小： 113.25 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
適用於
�
PowerEdge C5125 On Board Video
安裝指示
Default Instructions for PV775N-ESMA02.exe:
1. Download the utility to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
3. After the files have been unpacked, you may delete the self-extracting
file downloaded in step 1.
------------
HOW TO START
MS-DOS Version
1. Change to the directory where the utility program files are saved.
2. At the MS-DOS prompt, type "SMFLSH4" (no quotation marks) followed by
the options and press Enter.
Windows NT/2000 Version
This version of the utility, "SMFLSH4NT.EXE", can be run from an MS-DOS
window under Windows NT/2000 ONLY if DELL HardWare Instrumentation
Package or DELL Open Manage Server Agent is INSTALLED and RUNNING on the
system. To run "SMFLSH4NT.EXE", do the following at an MS-DOS window:
1. Change to the directory where the utility program files are saved.
2. Run the "SMFLSH4NT" utility followed by the applicable options.
1. Download the utility to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
3. After the files have been unpacked, you may delete the self-extracting
file downloaded in step 1.
------------
HOW TO START
MS-DOS Version
1. Change to the directory where the utility program files are saved.
2. At the MS-DOS prompt, type "SMFLSH4" (no quotation marks) followed by
the options and press Enter.
Windows NT/2000 Version
This version of the utility, "SMFLSH4NT.EXE", can be run from an MS-DOS
window under Windows NT/2000 ONLY if DELL HardWare Instrumentation
Package or DELL Open Manage Server Agent is INSTALLED and RUNNING on the
system. To run "SMFLSH4NT.EXE", do the following at an MS-DOS window:
1. Change to the directory where the utility program files are saved.
2. Run the "SMFLSH4NT" utility followed by the applicable options.