Seagate SAS ST9146752SS firmware version HTF6.
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This release contains firmware version HTF6 (FIPS140/SED Enabled) for Seagate SAS (15K rpm 2.5" SAS, SED) 146GB Hard Drives. Vendor model numbers ST9146752SS.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes / Enchancements:
- Fixed issue when hard reset occurred on port other than which data transfer was taking place
- Improved error handling when Notify Power Loss Expected sequence is initiated
- Improved performance of write operations in extreme temperature environments.
- Improved drive error handling
- Improved long term reliability of drive.
- Improved performance related to SED commands
閱讀更多- Fixed issue when hard reset occurred on port other than which data transfer was taking place
- Improved error handling when Notify Power Loss Expected sequence is initiated
- Improved performance of write operations in extreme temperature environments.
- Improved drive error handling
- Improved long term reliability of drive.
- Improved performance related to SED commands
繁體中文版
HTF6, A01
發佈日期
14 5月 2012
下載類型
韌體
類別
SAS 硬碟
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更，可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： SAS-Drive_Firmware_VP540_WN32_HTF6_A01.EXE
檔案大小： 11.24 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
f82cdd976374df3ce5ce2b6c0b03bf5f
SHA1：
41caeeca6561d4548a1891c2bdf3921eb1b4273c
SHA-256：
d01e5c5e6588c81397ef53d2ad971f6bf03ecebd6a7f8d54ddb064cd8bab37f7
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： SAS-Drive_Firmware_VP540_LN32_HTF6_A01.BIN.sign
檔案大小： 189 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
dae13324cc5bf48398d7e578a798c27a
SHA1：
d34cf621632bb604760934e25e57cdfb8ec7d5b7
SHA-256：
4468438b26c89705795c727934377dca700f59363726f12c9b54de81daef7a3e
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： SAS-Drive_Firmware_VP540_LN32_HTF6_A01.BIN
檔案大小： 9.97 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
7b5294438afed3f6c5ed2e5d45b51345
SHA1：
9fe67baaedf5181a869051cc31b1496aada28323
SHA-256：
9059db0edebc5fd5521eae70aa363ac66172a2fd535a493fd510542f7620bc13
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
支援的作業系統
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.7
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
適用於
HD,146,SAS6,15K,2.5,SGT,HORNET FIPS140-SED
安裝指示
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.