Dell PERC 5/i Adapter, v.5.2.2-0072, A06
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Dell Precision PERC 5/I Adapter Firmware release
Package Version: 5.2.2-0072
Package Version: 5.2.2-0072
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Package Version - 5.2.2-0072
Firmware Version - 1.03.50-0461
BIOS Version - MT28-9
Ctrl-R Version - 1.04-019A
MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
閱讀更多Firmware Version - 1.03.50-0461
BIOS Version - MT28-9
Ctrl-R Version - 1.04-019A
MPT Version - 00.10.62.00-IT
Please see release notes for detailed list of fixes/enhancements.
繁體中文版
5.2.2-0072, A06
發佈日期
22 10月 2008
下載類型
韌體
類別
SAS RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: ZipPack 外接
檔案名稱: DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
檔案大小: 1.35 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: BR189433.exe
檔案大小: 1.53 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
22859dbfb5e2165ffd23fe9188c404ac
SHA1:
不適用
SHA-256:
不適用
檔案格式: 外部版本資訊
檔案名稱: R189433.txt
檔案大小: 13.54 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含純文字,可使用標準文字編輯器予以檢視。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
6db0e46508e97ee65ea117a7f85cd0d1
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
1. When viewing SATA physical disk properties from Ctrl-R or other management
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
Instructions for BR189433.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Instructions for DELL_PERC-5-I-ADAPTER_A06_R189433.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Instructions for R189433.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.