Dell 2161DS Digital Switch, v.3.1.0.0 , 1.3 (A03-00)
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
2161DS KVM Firmware Update (1.3 / A03-00) for LDAP Support
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Features and Enhancements:
- Active Directory support for digital KVMs through LDAP
閱讀更多- Active Directory support for digital KVMs through LDAP
繁體中文版
3.1.0.0, 1.3 (A03-00)
發佈日期
12 9月 2006
下載類型
韌體
類別
裝置韌體
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： R132109.EXE
檔案大小： 17.91 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
This firmware is meant for use only on legacy 2161DS systems. It is not compatible with newer 2161DS-2 or 4161DS systems. For LDAP support on newer 2161DS-2 or 4161DS systems, please use the appropriate firmware available at support.dell.com.
支援的作業系統
Red Hat® Enterprise Linux 2.1
Red Hat® Enterprise Linux 3
Red Hat® Linux 7.3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
安裝指示
Instructions for R132109.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch:
1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control.
2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu.
3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management.
4. Select option 1, FLASH Download.
5. Type the IP address of your TFTP server and press the ENTER key.
6. Type the name of the appropriate languaged FLASH file and press the ENTER key.
7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key.
8. The 2161DS Console Switch will verify that the file you downloaded is valid.
9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems.
10. Once the upgrade is complete, a verification message will appear on screen.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch:
1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control.
2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu.
3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management.
4. Select option 1, FLASH Download.
5. Type the IP address of your TFTP server and press the ENTER key.
6. Type the name of the appropriate languaged FLASH file and press the ENTER key.
7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key.
8. The 2161DS Console Switch will verify that the file you downloaded is valid.
9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems.
10. Once the upgrade is complete, a verification message will appear on screen.