請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。
更新前，請閱讀以下所述的安裝說明與重要資訊。
PowerEdge M420 BIOS
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
PowerEdge M420 BIOS
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
* Updated Authenticated Code Module (ACM)
* Updated memory reference code
* Updated processor reference code
* Updated chipset reference code
* Updated Intel Xeon processor E5-2600 product family microcode for C1 stepping to 00000619
* Updated Intel Xeon processor E5-2600 product family microcode for C2 stepping to 0000070D
* Added Windows 2012 support
* Updated BIOS to support TCG Physical Presence Interface Specification version 1.2
* Increased the speed of the System Setup launch process
* Enhanced the iDRAC virtual mouse performance in pre-boot GUIs such as System Setup and Lifecycle Controller
* Enabled display of CPLD version information in BIOS setup
* Added UEFI boot support for Ubuntu
* Added support to allow PCI Memory Mapped I/O allocation above 4 GB
* Improved handling of storage devices without a native UEFI driver
* Updated DIMM types used in power budget calculation to include LRDIMMs
* Changed default option for the Memory Operating Mode for all Memory Configurations to "Optimizer"
* Increased system memory speeds for Memory Configurations with all slots in a channel populated and when the System Profile in BIOS setup is set to "Performance" mode or Memory Frequency in the "Custom" mode is set to Memory Maximum Performance
* Increased system memory speeds for 1600 MT/s DDR3L RDIMMS when one or two slots in a channel are populated.
* Enabled entering System Setup (F2 hotkey) on a boot where a one-time Service Partition Boot has been requested
* Added new power management option "Collaborative CPU Performance Control" in the System Profile settings.
* Added new power limiting option "Logical Processor Idling" in the Processor Settings
閱讀更多* Updated memory reference code
* Updated processor reference code
* Updated chipset reference code
* Updated Intel Xeon processor E5-2600 product family microcode for C1 stepping to 00000619
* Updated Intel Xeon processor E5-2600 product family microcode for C2 stepping to 0000070D
* Added Windows 2012 support
* Updated BIOS to support TCG Physical Presence Interface Specification version 1.2
* Increased the speed of the System Setup launch process
* Enhanced the iDRAC virtual mouse performance in pre-boot GUIs such as System Setup and Lifecycle Controller
* Enabled display of CPLD version information in BIOS setup
* Added UEFI boot support for Ubuntu
* Added support to allow PCI Memory Mapped I/O allocation above 4 GB
* Improved handling of storage devices without a native UEFI driver
* Updated DIMM types used in power budget calculation to include LRDIMMs
* Changed default option for the Memory Operating Mode for all Memory Configurations to "Optimizer"
* Increased system memory speeds for Memory Configurations with all slots in a channel populated and when the System Profile in BIOS setup is set to "Performance" mode or Memory Frequency in the "Custom" mode is set to Memory Maximum Performance
* Increased system memory speeds for 1600 MT/s DDR3L RDIMMS when one or two slots in a channel are populated.
* Enabled entering System Setup (F2 hotkey) on a boot where a one-time Service Partition Boot has been requested
* Added new power management option "Collaborative CPU Performance Control" in the System Profile settings.
* Added new power limiting option "Logical Processor Idling" in the Processor Settings
繁體中文版
1.3.5, 1.3.5
發佈日期
08 10月 2012
下載類型
系統 BIOS
類別
BIOS
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： M420_BIOS_YJWH8_WN32_1.3.5.EXE
檔案大小： 7.94 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
10d0befe41c6907d3d2af128d6e897f3
SHA1：
70548508905846ff86abdedb4649e4e5595761d7
SHA-256：
48e510a869be4c3bcfa2e0b2ee3619582cd49b7202726f13f499a33d6cf95e17
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： M420_BIOS_YJWH8_LN32_1.3.5.BIN.sign
檔案大小： 194 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
311cb75d804c1077303d77a48b2986a3
SHA1：
c3e09da7c4ce7d056282ddc91a44921c35ac52fb
SHA-256：
67d2d2473f48148a42ed899b778bc1db290b93d8b376080be1b8624beeefedba
檔案格式： 適用於 64 位元機器的自動解壓縮檔案
檔案名稱： M420-010305C.efi
檔案大小： 8.08 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含可從 EFI Shell 或 EFI Boot Manager執行的壓縮內容。將檔案下載到抽取式媒體裝置的 EFI 分割區。插入抽取式媒體，然後將系統重新開機，並透過 EFI Shell 或 EFI Boot Manager 執行程式。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
42b1f33aa1ff0a3c52cc019bcc87744a
SHA1：
0c09fa96ca2cc710874aa170e6b06de7d9411350
SHA-256：
afda3ba9aeb78f0c1c83d6e0cb8d780f283b908527a0d8eb82aa9310e480c7f1
檔案格式： 快閃 BIOS 執行檔
檔案名稱： M420-010305C.exe
檔案大小： 2.99 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式包含 BIOS 可執行檔。若要更新您的系統，請下載該檔案並將其儲存至您的桌面或硬碟，然後執行可執行檔。若要更新 BIOS，您的系統必須接上交流電源，而且電池電量至少需達 10% 以上。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
8c04989422df77e5a2c4b58344ed4c3d
SHA1：
a179a397ca56737df0ad212fdb16e61be6ec11d8
SHA-256：
2e3772f22112b27171d6276dc9bc514aeac491b06e615eab1af557f9c50b9cbd
檔案格式： 外部版本資訊
檔案名稱： M420-010305BIOS.txt
檔案大小： 7.54 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含純文字，可使用標準文字編輯器予以檢視。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
f0df6609a8f8cb64a91a0badacb268a5
SHA1：
5f29effba43876f521bb0ebf23965da704628e69
SHA-256：
6e7acbe8214cbe4b194ec2f98e97210f29ad7c8763c8609cfc39b6f3c91e1f12
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： M420_BIOS_YJWH8_LN32_1.3.5.BIN
檔案大小： 6.29 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
0f3b47cb36ddd20fa13e1014788fa7cb
SHA1：
aaff29104d90262e21c9a5526c453e111d2e413e
SHA-256：
20b30f07e2acac8fc8cfa01e9a82f81bfe0a81fe40f060f967ac9a3bab768bcc
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
None
適用於
Server BIOS 12G
安裝指示
Dell Update Package Instructions for DRMK
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.