Adaptec 39160 SCSI Controller - Firmware, v.BIOS v3.10, A03
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Adaptec 39160 SCSI Controller BIOS
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Includes all fixes and enhancements in Dell Special code stream and Adaptec Service Pack code
stream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
- key to toggle color/monochrome video display mode will be removed
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
閱讀更多stream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
-
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
繁體中文版
BIOS v3.10, A03
發佈日期
06 10月 2004
下載類型
系統 BIOS
類別
SCSI 非 RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： 160FW310.exe
檔案大小： 293.19 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
In order to create this diskette, the file must be downloaded to and executed on a system running
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
適用於
39160 SCSI Controller - Firmware
安裝指示
Custom Instructions for 160FW310.exe:
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.