Need TPM Support?
For additional helpful information, please refer to our Knowledge Base. View article.Dell ControlVault Firmware Update
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides Dell Control Vault Firmware to support DDP|ST1.5 (Dell Data Protection| Security Tools) and is supported on Latitude and Precision series that are running the following Windows Operating Systems: Windows 7 and Windows 8.1.
To view all drivers for your Latitude E5250/5250, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
ControlVault_Setup_CHJKC_A35_ZPE.exe | 5.54 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
ZipPack External
File Name:
ControlVault_Setup_CHJKC_A35_ZPE.exe
File Size:
5.54 MB
Format Description
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f68c55ef3e5ca4c6e26e010224f573b9
SHA1:
3baf073c43757243036596b5cc929b90493c8ece
SHA-256:
34ca21b880f0487bd532a80c472a772762915ab82e68444dae69b388a9e227c7
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
- Updated HID library to fix the issue where the card insert is broken if
contactless card is inserted for 2 seconds and removed multiple times causing the HID stack to ignore card insertions.
Enhancements
- Not Applicable
Read More
- Updated HID library to fix the issue where the card insert is broken if
contactless card is inserted for 2 seconds and removed multiple times causing the HID stack to ignore card insertions.
Enhancements
- Not Applicable
Version
30.7.025.0, A35
Release date
08 Oct 2014
Download Type
Firmware
Category
Security
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Important Information
REQUIREMENTS
-----------------
Please Read Broadcom USH Supplementary Release Notes document and
Broadcom USH Product Release Notes document prior to installing USH components !!!!!!!!!!!
The USHUPGRADE is not a stand alone application. It requires all files
contained in the firmware directory to update the USH firmware.
The files USHUPGRADE uses depend on the particular system.
The USHUPGRADE can only be run by a user with Administrator privileges.
-----------------
GETTING STARTED
-----------------
Please refer to the \firmware\
eadme.txt file for advanced command line
options and result codes
-----------------
Please Read Broadcom USH Supplementary Release Notes document and
Broadcom USH Product Release Notes document prior to installing USH components !!!!!!!!!!!
The USHUPGRADE is not a stand alone application. It requires all files
contained in the firmware directory to update the USH firmware.
The files USHUPGRADE uses depend on the particular system.
The USHUPGRADE can only be run by a user with Administrator privileges.
-----------------
GETTING STARTED
-----------------
Please refer to the \firmware\
eadme.txt file for advanced command line
options and result codes
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Looking for a different OS? View the list of Dell supported operating systems
Installation instructions
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The Dell ControlVault firmware update process contains a protection mechanism to prevent unauthorized updates.
Protection Mechanism: Anti-Hammering.
The Dell ControlVault is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the Dell ControlVault will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the Dell ControlVault has just been recently used. In this case, the firmware update tool will prompt you topower off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\V4R4T.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn't exist, you'll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\V4R4T files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\V4R4T)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The TPM setting must be set to enabled/deactivated in BIOS for the USH firmware to be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\V4R4T) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run DOSUPDAT.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
-------------------------------------------------
Installation/Update From Win7/Win8/Win8.1
-------------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\V4R4T\firmware)
11. Right click on ushupgrade.exe and select Run As Administrator.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE
Reboot will be required
-----------------
UPDATE PROTECTION
-----------------
Please note: The Dell ControlVault firmware update process contains a protection mechanism to prevent unauthorized updates.
Protection Mechanism: Anti-Hammering.
The Dell ControlVault is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the Dell ControlVault will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the Dell ControlVault has just been recently used. In this case, the firmware update tool will prompt you topower off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\V4R4T.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn't exist, you'll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\V4R4T files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\V4R4T)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The TPM setting must be set to enabled/deactivated in BIOS for the USH firmware to be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\V4R4T) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run DOSUPDAT.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
-------------------------------------------------
Installation/Update From Win7/Win8/Win8.1
-------------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\V4R4T\firmware)
11. Right click on ushupgrade.exe and select Run As Administrator.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE
Reboot will be required
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.