Driver Details

DR4000 Series Upgrade File

DR4000 series Upgrade File

Fixes & Enhancements

Update Manager contains the payload with all of the necessary drivers and software packages to update the DR from 1.x to 2.0

New features in the Release 2.0. version of the software:

Supports addition of up to two external enclosures per system. The DR Series system requires that each external enclosure added be equal to or greater than the DR Series system internal drive slot 0-11 capacity. The supported external expansion enclosure is the Dell PowerVault MD1200 direct-attached storage array.

Requirements for adding an enclosure include:
The base DR Series system be 600 GB or larger
You must meet the internal drive slot capacity just listed
You must install the required expansion shelf license

Other UM Enhancements
Ability to encrypt replicated data sent from the Source DR to the Target DR
Ability to compress replication data sent from Source DR to target DR
32 to 1 replication support
Configuration wizard added to GUI

Version

Version 2.0.0.0, A00; UM File

Category

IDM

Release date

16 Apr 2013

Last Updated

17 Apr 2013

Importance

Recommended

Available formats

File Format:GNU-Zip
File Name:DR-UM-2.0.0267.0-19.0267.tar.gz
Download Type:HTTP
File Size: 1257MB
Format DescriptionThis format consists of gnu zip files for software installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
169fc5a9e4373f1e6b67b7fd039c6767
SHA1:
2a745f9b742385712e3d3963a19e0056c742fbf1
SHA-256:
8aa23596e8825b8f4f5fed1403850d5a5eda306ac7d8d5197cd61d4aafd97fee

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions

1.1.1.0,A00 16 Oct 201210:08:38 PM
1.1.0.1,A00 07 Sep 20129:50:36 PM
1.0.1.4,A00 22 Aug 201212:06:20 AM
1.0.1.2,A00 21 Aug 20126:12:20 PM

Compatible Systems

Supported Operating Systems

Not Applicable

Applies to

DR4000 Upgrade File
DR4100 Upgrade File

Installation instructions

To upgrade the DR Series system software, complete the following:
Using the DR Series system GUI, select Support, and click the Software Upgrade link (or select Support/Software Upgrade).
The Software Upgrade page is displayed.
Type the path of the software upgrade file in the Select the upgrade file from local disk (or click Browse..., and navigate to the location where you downloaded the system software upgrade file).
Select the software upgrade file, and click Open.
Click Start Upgrade.

When you initiate a DR Series system software upgrade, the navigation panel displays only the Support page and the Software Upgrade option.
The administrator that initiated the software upgrade (known as the initiator administrator) sees a System Information pane that displays an alert and upgrade status, and the Current Version and Upgrade History versions of the DR Series system software listed in the Software Info pane.

There are only three possible outcomes during a DR Series system software upgrade operation:
Upgrade has completed successfully - no reboot is required.
Upgrade has completed successfully - but a reboot is required (click Reboot in the Software Upgrade page).
Upgrade has failed.

NOTE: If the DR Series system software upgrade operation fails, you can reboot the system and attempt another software upgrade operation using the DR Series system GUI. If this is unsuccessful, you can use the DR Series system CLI system --show command to view the current System State status. DR Series system software upgrades can also be performed using the DR Series system CLI. If both the DR Series system GUI and CLI attempts are unsuccessful, for details, see the Dell DR Series System Command Line Reference Guide.

NOTE: The DR Series system only supports the copying of upgrade images and diagnostics files to and from the system using WinSCP. The DR Series system does not support the copying or deleting of any other file types using WinSCP. To use WinSCP to copy DR Series software upgrade and diagnostics log files, ensure that the File Protocol mode is set to SCP (Secure Copy) mode.

NOTE: You can use other SCP tools with the DR Series system, but you cannot use these other SCP tools to copy other types of files to or from the DR Series system.

Refer to the DR4000 series Administrator Guide for more information.
My Download List-#1 (0 )

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.​

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).