Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

Dell Latitude 14 Rugged Extreme 7414/5414 and Dell Latitude 12 Rugged Extreme 7214 System BIOS

This package provides the Dell System BIOS update and is supported on Dell Latitude 14 Rugged Extreme 7414/5414 and Dell Latitude 12 Rugged Extreme 7214 for Windows and DOS Operating Systems.

Fixes & Enhancements

Fix:
- Fix the issue that cannot see BIOS logo over kvm.
- Fix the description of Fn Lock option in BIOS setup.

Enhancements:
- Update ESRT GUID and AMIDebugRxPkg 23.5.
- Fix debug_mode assert on BindingsPei.c.

Version

Version 1.1.0, 1.1.0

Category

BIOS

Release date

07 Jun 2016

Last Updated

11 Jun 2016

Importance

Available formats

File Format:Non-Packaged
File Name:Latitude_7414_7214_5414_Rugged_1.1.0.exe
Download Type:HTTP
File Size: 9 MB
Format Description:This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
To ensure the integrity of your download, please verify the checksum value.
MD5:
7321cb5961b0ae8e082f8b26b23d4d55
SHA1:
ed53a29ca4168c687a4f2549fbb5d0dd83dbde23
SHA-256:
a42e8ef29690b8ccd4872f60078b462d8cbbe17d7245ffcff82cbb2bf21a6fe1

By downloading, you accept the terms of the Dell Software License Agreement.

Other versions
1.15.0,1.15.0 06 Feb 20187:44:23 PM
1.14.0,1.14.0 31 Oct 20172:00:47 AM
Applies to
Dell Latitude E5404 (ATG)
Installation instructions
BIOS Update Executable for Windows/OS Independent

Download
1. Click Download File to download the file.
2. When the File Download Window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from a Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows will auto restart and update the BIOS at the system startup screen.
3. After the BIOS update is complete, the system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of the installed operating system
1. Copy the downloaded file to a USB flash device. The flash device does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the Dell logo screen, press F12 to access the one-time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Review the warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.

--------------------------------------------------------------------------------
Note: If BitLocker is enabled on your system, please suspend BitLocker encryption before updating the system BIOS.
x
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).