AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Firmware for the PowerVault 132T Library, LTO1 and LTO2 Tape Drives, SDLT320 Tape Drive, Remote Management Unit, and SNC Module.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to upzip the files (the default location is x:\dell\drivers\R103743). 4. Click on the OK button to extract files. 5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation 1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:
NOTE: x: represents the drive where the files were unzipped
PowerVault 132T LTO1 and LTO2 Tape Library Application Code 227D.GY002 located in x:\Dell\Drivers\R103743\Library\LTO PowerVault 132T SDLT320 Tape Library Application Code 227D.GZ002 located in x:\Dell\Drivers\R103743\Library\SDLT PowerVault 132T Remote Management Card Firmware 181F.00003 is located in x:\Dell\Drivers\R103743\RMU PowerVault 132T LTO1 Tape Drive Firmware 36U3 located in x:\Dell\Drivers\R103743\LTO1 Drive PowerVault 132T LTO2 Tape Drive Firmware 53Y3 located in x:\Dell\Drivers\R103743\LTO2 Drive PowerVault 132T SDLT320 Tape Drive Firmware 5252 (V82) located in x:\Dell\Drivers\R103743\SDLT Drive PowerVault 132T SNC (FC Bridge) Module Firmware 4.45.04 is located in x:\Dell\Drivers\R103743\SNC