Driver Details

Dell ControlVault Windows Biometric Framework Integrated Driver

This package provides the Dell ControlVault Windows Biometric Framework Integrated Driver and is supported on Precision and Latitude models that are running the following Windows Operating System: Windows 7.

Fixes & Enhancements

Initial Release

Version

Version 2.2.029, A00

Category

Security

Release date

24 Aug 2011

Last Updated

05 Mar 2014

Importance

Optional

Available formats

File Format:Hard-Drive
File Name:DELL_CONTROLVAULT-WINDOWS-BI_A00_R308325.exe
Download Type:HTTP
File Size: 21MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Windows 7, 32-bit

Applies to

ControlVault Windows Biometric Framework Integrated

Installation instructions

Custom Instructions for DELL_CONTROLVAULT-WINDOWS-BI_A00_R308325.exe: NOTE: Installation order is very important – use the following procedure, including reboots or the software will not function properly: 1. Download the following software packages and install in the order listed below: a. Dell Data Protection | Access | Drivers Package. i. Double click package filename and select Custom installation Setup Type. ii. Uncheck the Dell ControlVault box. iii. Continue to follow the wizard installation instructions until completed. b. Dell ControlVault Windows Biometric Framework Driver package i. Double click package filename and follow the wizard installation instructions. ii. Go to the "C:\dell\drivers\R308325\" USH folder and double click on CVHCI.msi and follow the wizard installation instructions until completed. iii. Reboot. c. Dell ControlVault Firmware i. Double click package filename and follow the wizard installation instructions. ii. Go to "C:\dell\drivers\R308325\" firmware folder and double click on ushupgrade.exe and follow the wizard installation instructions. iii. In the pop up dialog window press the Start button. iv. When installation is completed press the Restart button. The system will reboot. 2. Enable ControlVault Windows Biometric Framework feature (Start->All Programs->Broadcom->USH Tools and click on ControlVault WBF a. In pop up dialog window select Enable and the press the Set button. b. Press the Exit button. c. Allow time for any windows updates to complete. Errata Data: Windows Update may sometimes conflict with the installation of the Dell ControlVault Windows Biometric Framework driver installation and not allow proper installation. To identify if this occurs, go to Device Manager (Start->My Computer->Properties->Device Manager) and click on “Biometric Devices” and notice if there is a yellow exclamation mark (yellow bang) on the “ControlVault w/Fingerprint swipe sensor”. If this is so, right click on “ControlVault w/Fingerprint swipe sensor” and select Update Driver and choose “Browse my computer for driver software. Wait until Driver has been detected and installed (~30 secs).
My Download List-#1 (0 )

Drivers help and tutorials

Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.​

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.