Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

Dell PowerConnect 3248, A01

Management information bases (MIBs) are a collection of definitions, which
define the properties of the managed object within the device to be
managed. Every managed device keeps a database of values for each of the
definitions written in the MIB. It is not the actual database itself - it
is implementation dependant. Definition of the MIB conforms to the SMI
given in RFC 1155. Internet MIB is given in RFC 1213 sometimes
called the MIB-II

Version

Version A01, A01

Compatibility

Operating Systems
  • Not Applicable

Applies to

PowerConnect 3248;

Date

Release date
6/16/2003
Last Updated
11/3/2011

Importance

Optional. Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Available formats

File Format:Hard-Drive
File Name:R62192.EXE
Download Type:HTTP
File Size: 128KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

To use these MIB's you will need to import them into your current Network
Management software. This should be done in the manner that the vendor's
helps file instructs.

(All software vendors MIB importing tools are different. Please use
the "Help" or "Read Me" file to gain more information on this process)

Fixes & Enhancements

1. staPortProtocolMigration OBJECT-TYPE
DESCRIPTION "When operating in RSTP (version 2) mode, writing TRUE(1)to this object forces this port to transmit RSTP
BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read."

2. staPortAdminEdgePort OBJECT-TYPE

DESCRIPTION
"The administrative value of the Edge
Port parameter. A value of TRUE(1)
indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port."

3. staPortOperEdgePort OBJECT-TYPE
DESCRIPTION
"The operational value of the Edge Port
parameter. The object
is initialized to the value of
staPortAdminEdgePort and is set
FALSE when a BPDU is received."

4. staPortAdminPointToPoint OBJECT-TYPE
DESCRIPTION "The administrative point-to-
point status of the LAN segment
attached to this port. A value of forceTrue
(0) indicates that this port should always be
treated as if it is connected to a point-to-
point link. A value of forceFalse(1)indicates
that this port should be treated as having a
shared media connection. A value of auto(2)
indicates that this port is considered to
have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the
MAC entity is configured for full duplex operation, either
Through auto-negotiation or by management means."

5. staPortOperPointToPoint OBJECT-TYPE
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."

6. staPortLongPathCost OBJECT-TYPE
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This object is used to configure the spanning tree port
path cost in 32 bits value range when the
staPathCostMethod is long(2).

If the staPathCostMethod is short(1), this mib object is not
instantiated."

7. staProtocolType OBJECT-TYPE
DESCRIPTION "The version of Spanning Tree Protocol the bridge is
currently running. The value 'stp(1)' indicates the
Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w and the value 'mstp(3)' indicates the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the protocol become available."

8. staTxHoldCount OBJECT-TYPE
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."

9. staPathCostMethod OBJECT-TYPE
DESCRIPTION "Indicates the type of spanning tree path cost mode
Configured on the switch. This mode applies to all
instances of the Spanning tree protocol running on
the switch. When the value of this MIB object is
changed, the path cost of all ports will be
reassigned to the default path cost values
based on the new spanning tree path cost mode and
the ports' speed. When the value of this MIB object
is set to long(2), the staPortLongPathCost MIB
object must be used to retrieve/configure
the spanning tree port path cost as a 32 bit value.
The set

Installation instructions



Hard Drive Installation (via WinZip) with Setup.exe File for R62192.EXE

Download

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled R62192.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\r62192. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\r62192 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.






My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more