Driver Details

Adaptec PERC 320/DC, v.1.00.024, A03

This is PERC Storage Manager, the Operating System based utility for the PERC 320/DC

Fixes & Enhancements

This version adds language localization for the online help files and
fixes an installation issue on Traditional Chinese language operating


Version 1.00.024, A03

Release date

06 Dec 2002

Last Updated

03 Nov 2011



Available formats

File Format:Hard-Drive
File Name:R52209.EXE
Download Type:HTTP
File Size: 8MB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
Not available
Not available
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Compatible Systems

Supported Operating Systems

MS Windows NT 4.0
MS Windows 2000
MS Windows XP

Installation instructions

Hard Drive Installation (via WinZip) with Setup.exe File for R52209.EXE


1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.


1.Double-click the new icon on the desktop labeled R52209.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\r52209. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\r52209 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.

Important Information

Please note the following when using the PERC 320/DC with Windows NT 4.0:
The PERC Storage Manager utility that is the operating system based array
configuration and monitoring utility can only be installed on Windows NT
4.0 Service Pack 6 and above. It is important to note that if Service
Pack 5 or below is used, the monitoring functionality that PERC Storage
Manager provides will not be available. The monitoring functionality
normally provides pop-up messages that alert the user of various warning
conditions, such as:
Power Supply Failures
Hard Disk Drive Failures
Fan Failures
Temperature Level Exceeding Warning and Critical Levels

Internal Hard Disk Drive Failures
Array Failures/Change of Status
Hard Disk Drive Predictive Failure Warnings

Hard disk drive failures will still be signalled by an audible alert.
However, without the monitoring functionality it is recommended that
users keep a closer watch on attached components.
My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.