Dell Tablet Dock FW Update Tool
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides Dell Tablet Dock firmware for use with Dell Venue 11 Pro 7130, 7139 and Latitude 13 7000 Series 2-in-1 notebooks that are running Windows 7 or Windows 8.1 operating system.
To view all drivers for your Venue 7130 Pro/7139 Pro, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
Dell_Tablet_Dock_Update_Tool_WJGFG_A05_ZPE.exe | 2.74 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
ZipPack External
File Name:
Dell_Tablet_Dock_Update_Tool_WJGFG_A05_ZPE.exe
File Size:
2.74 MB
Format Description
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f24b35d06ecf3ac07a96c28434b4f273
SHA1:
bc31eefe3405d645bac78da3577285ca949a691f
SHA-256:
1753f521aa8436aecacc5b6637a3c9b6efdd7ce3722ad5fd8d44eb729a9a9f54
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
-Addresses multi-monitor persistence issues after power management events and hot-docking.
-A05 is a new MST hub firmware that helps address the random flashing on external monitors on the DTDK Tablet Dock.
Enhancements:
- Improved external monitor hot-plug detection
NOTE: Do not attempt to update the DTDK Tablet Dock firmware via remote download/execution.
Read More
-Addresses multi-monitor persistence issues after power management events and hot-docking.
-A05 is a new MST hub firmware that helps address the random flashing on external monitors on the DTDK Tablet Dock.
Enhancements:
- Improved external monitor hot-plug detection
NOTE: Do not attempt to update the DTDK Tablet Dock firmware via remote download/execution.
Version
0.41.26, A05
Release date
20 Jul 2015
Download Type
Firmware
Category
Docks/Stands
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Supported Operating Systems
Windows 7, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Looking for a different OS? View the list of Dell supported operating systems
Installation instructions
NOTE: Do not attempt to update Tablet Dock firmware via remote download/execution.
Download
1. Click "Download File" to download the file.
2. When the File Download window appears, click "Save this program to disk" and click "OK". The "Save In" window appears.
3. From the "Save In" field, click the down arrow and then click to select Desktop and click "Save". The file will download to your desktop.
4. When the "Download Complete" window appears, click "Close". The file icon will appear on your desktop.
Prepare for update
- External monitor(s) must be on and connected to the Dell Tablet Dock I/Dock II (HDMI and/or DisplayPort).
- The Tablet display must be set in PC screen only mode.
- Dell Tablet Dock power adapter must remain connected to the dock and plugged into A/C power during the update process.
- The Tablet must remain docked in the Dell Tablet Dock I/Dock II during the update process.
- Do not Shut Down or put the Tablet in Sleep mode during the update process (Make sure System Sleep and Display Timeout are set to 10 minutes or greater).
NOTE: If the above conditions are not met during the firmware update process, the firmware update will fail or not complete.
Install
1. Double-click the new icon on the desktop labeled "Dell_Tablet_Dock_Update_Tool_WJGFG_A05_ZPE.exe". If the User Account Control windows appears, click "Yes" to continue.
2. Package details window comes up, click "Continue".
3. Click "Ok" to unzip folder, then click "Ok" when unzip is complete.
4. Browser window with set up instructions will come up. Set up the Tablet, Dock I/Dock II and display according to the instructions. Click "Install Now" button.
5. Click "Update" on the firmware update tool to begin the update process.
- If the update too indicates a set up error, correct it and press "Retry".
A bar will show the update progress. The update takes approximately 2 minutes to complete.
6. When complete, the update tool displays "Update Process Successful!". Click the "Done" buttonto exit the update tool.
Unplug the power connector from the Dell Tablet Dock I /Dock II for 15 seconds, then plug the power connector back into the Dell Tablet Dock I /Dock II for the update to be complete.
Reboot will be required
Download
1. Click "Download File" to download the file.
2. When the File Download window appears, click "Save this program to disk" and click "OK". The "Save In" window appears.
3. From the "Save In" field, click the down arrow and then click to select Desktop and click "Save". The file will download to your desktop.
4. When the "Download Complete" window appears, click "Close". The file icon will appear on your desktop.
Prepare for update
- External monitor(s) must be on and connected to the Dell Tablet Dock I/Dock II (HDMI and/or DisplayPort).
- The Tablet display must be set in PC screen only mode.
- Dell Tablet Dock power adapter must remain connected to the dock and plugged into A/C power during the update process.
- The Tablet must remain docked in the Dell Tablet Dock I/Dock II during the update process.
- Do not Shut Down or put the Tablet in Sleep mode during the update process (Make sure System Sleep and Display Timeout are set to 10 minutes or greater).
NOTE: If the above conditions are not met during the firmware update process, the firmware update will fail or not complete.
Install
1. Double-click the new icon on the desktop labeled "Dell_Tablet_Dock_Update_Tool_WJGFG_A05_ZPE.exe". If the User Account Control windows appears, click "Yes" to continue.
2. Package details window comes up, click "Continue".
3. Click "Ok" to unzip folder, then click "Ok" when unzip is complete.
4. Browser window with set up instructions will come up. Set up the Tablet, Dock I/Dock II and display according to the instructions. Click "Install Now" button.
5. Click "Update" on the firmware update tool to begin the update process.
- If the update too indicates a set up error, correct it and press "Retry".
A bar will show the update progress. The update takes approximately 2 minutes to complete.
6. When complete, the update tool displays "Update Process Successful!". Click the "Done" buttonto exit the update tool.
Unplug the power connector from the Dell Tablet Dock I /Dock II for 15 seconds, then plug the power connector back into the Dell Tablet Dock I /Dock II for the update to be complete.
Reboot will be required
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.