PowerConnect 8024/8024F, Firmware Version 5.1.3.7,A19

Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.3.7_Release_Notes".

Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf".
To view all drivers for your PowerConnect 8024, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

PC8024v5.1.3.7a19.zip | 12.51 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Download Go to Latest Version
Show details | Download current version instead | View other downloadable formats
File Format: Extracts files directly to local disk
File Name: PC8024v5.1.3.7a19.zip
File Size: 12.51 MB
Format Description
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f43f304c4215aea14266cb57946533b1
SHA1:
599047a5e1411113290e55b8d795e3a3c39ef765
SHA-256:
40836bbdaa0b55761c30c4196b9c1c4e1cea3307578da98de6c55aa6ea76127a

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Release 5.1.3.7 contains fixes for the following issues:

622897 PC8024 - SNMP Product Status OID does not change after a fan/power failure
660307 PC6248P - No Receive Discards counter available
674190 PC8100 - Stack member unit crash with task "hapiMcAsyncTask"
679802 PC7024 - Software routing when using secondary SVI
680596 SNMP OID not incrementing snmpEngineBoots value
687093 nimTask crash on PC8024 stack while routing traffic with OSPF enabled
690946 4x M8024-k switches, one intermittently doesn't join a stack after reboot from CLI
705979 dot1sBpduReceive(): Discarding the BPDU, cannot get buffer from buff pool
707212 8100 stack member reboots with task bcmRPC. Firmware 5.1.1.7
708516 PC81xx - IPMapForwardingTask and Interrupt Thread crashing switch 5.1.1.7
709801 M8024k - Error with temperature status reporting
712702 Using WebUI to set fields Dynamic VLAN creation and GVRP Registration issue
713435 OpenSSH Vulnerability Issue - Fix for: CVE-2012-0814
716307 crashdump - (null) XXXXX - possibly SSH related
722543 After failover vlan is getting associated with physical interface.
722543 After failover the spanning-tree status of the physical interface is transitioned from discarding to forwarding.
726597 Source MAC address from LLDP frames learned in bridge address table
728001 PC8100 - WebUI showing medium temp, while the CLI was showing good temp.
734385 MIB Walk on M6348 and M8024-K running latest firmware not returning the same results (5.1.2.3)
735710 PC81xx - Switch crash when VRRP configuration applied.
749137 IPv6 PIM Multicast traffic stops working with MFC-V6 error messages
Read More

Version

5.1.3.7, A19

Release date

14 Feb 2014

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
View Important Information
File Format: A text file containing customer friendly fixes and enhancements information
File Name: PC8024ReadMev5.1.3.7a19.txt
File Size: 3.16 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
6f06c1cc861cfef4b971b06cbdd3eee9
SHA1:
4b172cfc8e1df5d31e57cc6915eb78b2019f6097
SHA-256:
bf79c3e68a8ce9d12bc0b09d4d79621492d5019730b35e9d29175ef0042cfed1

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.3.7_Release_Notes".

Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf".
5.1.18.1, A3510 May 2022
5.1.17.1, A3413 Jul 2021
5.1.16.1, A3324 Jan 2020
5.1.15.2, A3228 Jun 2019
5.1.14.1, A3118 Dec 2018
5.1.13.1, A3002 Jul 2018
5.1.12.2, A2901 Dec 2017
5.1.9.3, A2511 Sep 2015
5.1.8.2, A2415 Apr 2015
5.1.7.5, A2327 Jan 2015
5.1.6.3, A2216 Oct 2014
5.1.5.1, A2124 Jul 2014
5.1.4.5, A2002 May 2014
5.1.2.3, A1807 Nov 2013
v5.1.1.7, A1730 Jul 2013
v5.1.0.1, A1603 Apr 2013
v5.0.0.4, A1429 Aug 2012
v4.2.2.3, A1311 May 2012
4.2.1.3, A1230 Jan 2012
4.2.0.4, A1106 Dec 2011
(1) Download the zip file - PC8024v5.1.3.7a19.zip
(2) Extract the image file "PC8024v5.1.3.7.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf" extracted from zip file.

Reboot will be required

Need help with network connection issues?

Find a solution in Dell's network troubleshooting and usage guide.

Drivers help and tutorials